- 5,978
- 4,217
- 113
I read through the troubleshooting portion of the -10 and didn't see this explained.
Here's what I've got:
MEP802 340hrs , runs fine when set to 208 3phase. Runs fine when set to 120v single phase. Convenience outlets work fine in both positions. No fault lights. Gauges wnl.
Copious black smoke and irregular loping, fails to reach normal operating rpm when set to 120/240v single phase. "Short circuit" light illuminates.
Nothing connected to the lugs. Contactor open.
What do I need to look at in more detail?
(This is not the machine that I had previously connected to the house.)
Here's what I've got:
MEP802 340hrs , runs fine when set to 208 3phase. Runs fine when set to 120v single phase. Convenience outlets work fine in both positions. No fault lights. Gauges wnl.
Copious black smoke and irregular loping, fails to reach normal operating rpm when set to 120/240v single phase. "Short circuit" light illuminates.
Nothing connected to the lugs. Contactor open.
What do I need to look at in more detail?
(This is not the machine that I had previously connected to the house.)
Attachments
-
181.1 KB Views: 11
-
161 KB Views: 11