MEP804A Hertz Gauge

[DBLE]

Looking for a OEM Hertz Gauge for a MEP804A Genset any sources out there? Part #88-21072 (from the tech manual)

 

[Ray70]

Are you missing the gage or is yours broken?
If its broken, can you read the writing on the face and tell me what the FS current is? ( curious if the gage from a different set would also work, since 002/003 and 802/803 are both the same functionally, I bet the 804 05 and 06 are as well.

 

[Zed254]

Punched your part number into parttarget.

https://www.parttarget.com/6625-01-366-0192_6625013660192_349-028.html/-71ae6c1d-1e63-4d81-bf02-3c6af56305ef?searchtext=88-21072&searchoption=sku&originalsearchtext=88-21072

One of the part numbers listed is 60.1034 .

Ebay search on 60.1034 gets 2 hits.

https://www.ebay.com/itm/353685903609?epid=1020867171&hash=item52595298f9:g:eek:ZIAAOSwnjlhSjIo

Search Ebay on the NSN and you'll get a third hit.

 

[DBLE]

Punched your part number into parttarget.

https://www.parttarget.com/6625-01-366-0192_6625013660192_349-028.html/-71ae6c1d-1e63-4d81-bf02-3c6af56305ef?searchtext=88-21072&searchoption=sku&originalsearchtext=88-21072

One of the part numbers listed is 60.1034 .

Ebay search on 60.1034 gets 2 hits.

https://www.ebay.com/itm/353685903609?epid=1020867171&hash=item52595298f9:g:eek:ZIAAOSwnjlhSjIo

Search Ebay on the NSN and you'll get a third hit.

Thank you very much, Ebay hit on OEM 60.1034 Exactly what I needed and new. Thanks again.

 

[Guyfang]

Still, look at the gage for RAY. It might help others, He is trying to see if other gages might work also.

 

[DBLE]

Are you missing the gage or is yours broken?
If its broken, can you read the writing on the face and tell me what the FS current is? ( curious if the gage from a different set would also work, since 002/003 and 802/803 are both the same functionally, I bet the 804 05 and 06 are as well.

Appreciate your response Thank you, another member also responded, and located the gauge. Ebay 60$ new. my issues solved. My gauge was in working condition just was a bit sticky My gauge was a 48-62 Hertz and "Ideal" manufacture, part number 60.1034. Thanks again

 

[DBLE]

Appreciate your response Thank you, another member also responded, and located the gauge. Ebay 60$ new. my issues solved. My gauge was in working condition just was a bit sticky My gauge was a 48-62 Hertz and "Ideal" manufacture, part number 60.1034. Thanks again

Please note the eBay listing did state MEP802, 803, 804, 805, 806 So yes I think the part number 60.1034 will fit other models than my 804A

 

[Zed254]

Here you go, Ray. F.S.= 1mADC