RichRiley
New member
- 4
- 0
- 1
- Location
- Pittsburgh/PA
New to me 2010 Fermont mep804b picked up at Columbus yesterday. 13.2 hours on the meter and the engine compartment looks new. All accessory items are still in plastic bags in their stowage compartments including operators TM and maintenance TM. The auction checkout showed that the starter solenoid had to be crossed to start as the starting switch was intermittent and the low voltage light was illuminated. I read the online version of the operators manual and maintenance tech manual and thought that with SS forum help I could probably figure this out so I went ahead with the purchase.
Got her home and hooked up a smart charger after disconnecting battery terminals. Both batteries show reverse polarity! I am going to drain them of voltage and try to rereverse them as the prices of the 6tfm? Batteries are hefty.
Does anyone have similar experience with this phenomenon? Should I expect electronic issues? Should I continue to try a normal startup with these batteries if they can be brought back to correct polarity or do some further test and evaluation? Thanks in advance for any and all thoughts and advice.
Got her home and hooked up a smart charger after disconnecting battery terminals. Both batteries show reverse polarity! I am going to drain them of voltage and try to rereverse them as the prices of the 6tfm? Batteries are hefty.
Does anyone have similar experience with this phenomenon? Should I expect electronic issues? Should I continue to try a normal startup with these batteries if they can be brought back to correct polarity or do some further test and evaluation? Thanks in advance for any and all thoughts and advice.