I changed out my front brake shoes and was considering buying some brake fluid... I knew something about my m1009 requiring Dot 5 (silicone based) brake fluid. Did a little bit of research and learned how to test the brake fluid in the master cylinder to see if it was Dot 3 or Dot 5. Turns out I have both in there!!!! the Dot 5 was floating around on top and the Dot 3 was a nasty jell-like goo on the bottom.... so now the big question- How do I go about flushing all this junk out of the system? Do I just go and buy a few quarts and bleed it all through?
I will be away from internet access for about a week, I will check back then.
I will be away from internet access for about a week, I will check back then.