wreckerman893
Possum Connoisseur
- 15,623
- 2,027
- 113
- Location
- Akenback acres near Gadsden, AL
Years ago I remember seeing an idea for heating a swimming pool by using convection.
The idea was to take a coil of black plastic pipe and put it into a black 4x8 plywood box covered with glass.....the water would be heated and move by convection from the pool to the heater and back to the pool.
Does anyone think that this idea could be used to heat oil prior to filtering.
The main issue I see is the sluggishness of the cool oil.
Comments, suggestions, constructive ideas.
See diagram.
The idea was to take a coil of black plastic pipe and put it into a black 4x8 plywood box covered with glass.....the water would be heated and move by convection from the pool to the heater and back to the pool.
Does anyone think that this idea could be used to heat oil prior to filtering.
The main issue I see is the sluggishness of the cool oil.
Comments, suggestions, constructive ideas.
See diagram.
Attachments
-
19.9 KB Views: 23