-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MRAP Adapter Plates for M35A2
- Thread starter 502NDMP
- Start date
- 9,604
- 1,494
- 113
- Location
- mid- michigan
Are you sure peashooter isn't making them anymore ? he still has a ad in the classifieds and if he quit selling them he should have deleted the ad .
[h=1]~ MRAP ADAPTER PLATES ~ Fits 10 Lug MRAP Wheels to Deuce[/h]
[h=1]~ MRAP ADAPTER PLATES ~ Fits 10 Lug MRAP Wheels to Deuce[/h]
foothill4play
New member
- 61
- 1
- 0
- Location
- Angels Camp, Northern Cali
I'm sure he is not. I asked him. I'm curious who is the next best go to as well. I actually hope the ad stays, there is valuable information in that ad, that I'd like to see kept.
- 9,604
- 1,494
- 113
- Location
- mid- michigan
The information needs to be moved to a regular forum , at some point it will be auto pruned in the classifieds and it will be lost.
- 6,993
- 2,558
- 113
- Location
- Montevideo/Uruguay
A good portion of it is "safe" since it was already posted here, starting at post #132.
Hopefully we could convince the author (peashooter) to take the time and compile what else good info is in his ad, to be posted in that same thread also.
G.
Hopefully we could convince the author (peashooter) to take the time and compile what else good info is in his ad, to be posted in that same thread also.
G.
peashooter
Well-known member
- 1,038
- 205
- 63
- Location
- Hanover, minnesota
I do have all the info from the original MRAP ADAPTER classified posting and much more that I've consolidated into a 4 page instruction sheet that I send out with adapters. I'll get that added to the link Gringeltaube mentioned one of these days.
- 6,088
- 4,493
- 113
PM sent...
ZOMBIE5TON
New member
- 4
- 1
- 0
- Location
- el paso texas
I do have the file I am waiting on the new table to come in and I'll be able to make them
- 442
- 832
- 93
- Location
- Orygun
Didn't realize these were so hard to find, I can make them for you if need be, but it might be best to find an old set someone has lying around as steel prices are pretty stupid right meow .
- 807
- 832
- 93
- Location
- W.WA
Try this place: https://westerncanadianrockwell.ca/
I haven't ordered from them, but they showed up in another thread.
I haven't ordered from them, but they showed up in another thread.
- 6,993
- 2,558
- 113
- Location
- Montevideo/Uruguay
I don't think you are referring to this thread, or...? (Clearly, there are some issues with those.)
ZOMBIE5TON
New member
- 4
- 1
- 0
- Location
- el paso texas
I will be making some soon I do have the file just waiting on my new plasma table
- 2,672
- 2,220
- 113
- Location
- Sunman Indiana
Western Canadian Rockwell had the best price when I bought mine, but... see link below!
If you do decide your going to order from them, I’d give them a call first and see if they will countersink the lug seats to the correct depth for you.
Western Canadian Rockwell
BAD
This is what a proper seat looks like
Also, be aware that Western Canadian Rockwell hides behind their “off road use only” disclaimer to counter their poor workmanship. Interestingly they do go through the expense of engraving “off road use only” on the adapters, but not cutting proper lug seats in them!
50BMG
New member
- 57
- 2
- 0
- Location
- Caliente, CA
Zombie5ton,can you make them for a decent to 10 hole bud truck wheel.If so how much for 4?
ZOMBIE5TON
New member
- 4
- 1
- 0
- Location
- el paso texas
For mrap or combat
50BMG
New member
- 57
- 2
- 0
- Location
- Caliente, CA
Sorry I'm confused, I thought the map wheels were a different 10 bolt pattern than the semi truck wheels.I'm thinking running super singles 22.5 on the Duece.
- 6,993
- 2,558
- 113
- Location
- Montevideo/Uruguay
Only two 10-bolt patterns are being used in the truck world, military or civilian:
1) SAE std: 10 on 11-¼", with a 8-¾" (pilot)center hole.
2) Metric: 10 on 335mm (13.19"), with a pilot hole of 281mm (11.063").
Most MRAP wheels come with the type 2) center, as well as many of the more modern 22.5" OTR truck wheels.
Most likely, what you need is an adapter plate, 10-on-335mm --> 6-on-8.75".
Last edited:
For standard budd pattern is what he wants for 22.5s so he needs them for combat wheels.
Mrap wheels are 13in center lug to center lug budds are 11 in center lug across. If he wanted to run super single 22.5s it would be cheaper to go with pilot hub wheels they are cheaper than budds by far
Mrap wheels are 13in center lug to center lug budds are 11 in center lug across. If he wanted to run super single 22.5s it would be cheaper to go with pilot hub wheels they are cheaper than budds by far