440Duster
New member
- 43
- 1
- 0
- Location
- Macomb/Oklahoma
All I have left to do is route the cables. I mounted the rear lightbar flush in the panel below the tailgate, the front lightbar over the winch and the spotlights on the cowl. As for the control box, it is on a hinged mount that folds down like an armrest when needed. I plan to also mount one of the long lightbars on the front edge of the hardtop once I get it engineered as I would like to have it caged for protection. Since I operate in treed areas,that is also my reasoning for putting the spotlights where I did. For those who plan to install an Eyecon kit on anything other than what it is designed for, a wiring mod in the vehicle interface box is required. I installed a lighted switch which activates the solenoid which provides power to the circuit breakers. The MRAP master power switch would normally do that.
. View attachment 597778View attachment 597784![20151121_114322.jpg 20151121_114322.jpg](https://www.steelsoldiers.com/data/attachments/408/408219-32b91c1b912de190fc0522dd358dc74a.jpg)
![20151128_142355.jpg 20151128_142355.jpg](https://www.steelsoldiers.com/data/attachments/408/408222-d4d3672d950066000c162b53833088b1.jpg)
. View attachment 597778View attachment 597784
![20151121_114322.jpg 20151121_114322.jpg](https://www.steelsoldiers.com/data/attachments/408/408219-32b91c1b912de190fc0522dd358dc74a.jpg)
![20151128_142355.jpg 20151128_142355.jpg](https://www.steelsoldiers.com/data/attachments/408/408222-d4d3672d950066000c162b53833088b1.jpg)