Mtvr Height

[camoyj7]

Anyone know the height of the roof of the MK23 Mtvr? The t.m. says 141" operation height but that's with stack and air intake.

 

[simp5782]

https://www.steelsoldiers.com/showt...ary-equipment-Weights-Size-Details&highlight=



Should be in this

 

[camoyj7]

It shows 98" That's the height with top folded down. I know it's taller than 8' with roof on. But thanks anyway.

 

[simp5782]

Shoot for about 12ft. Close enough number. Truck has to go on a rgn or lowboy if that is what you are looking for

 

[camoyj7]

Yeah just in case I can't get it running I'll need to haul it. I'm just trying to find actual height of roof without stack. TM shows 141" just under 12' but stack looks to be 12" or more over the height of roof.

 

[simp5782]

Anything over 10ft 3 inches requires an RGN or lowboy or drop deck. 10ft 3. Sometimes 10ft 6 and under can go on a step deck.

Every mtvr I have seen being hauled has been solo on a drop deck

 

[simp5782]

On a 38in step. Its under with the stack on. Of course airing down will gain 10in.

 

[MAdams]

I can measure tonight but I can tell you that its way too tall for a M322 trailer. I think the cab is 10'6"

 

[simp5782]

I can measure tonight but I can tell you that its way too tall for a M322 trailer. I think the cab is 10'6"

On flat tires and the exhaust off, truck facing forward it will get under 13ft6.

I hate those rear humps that gain that extra 3in

 

[Navy dude]

I can't tell you to the inch but I was concerned about the height since I was putting my MTVR in an airplane hangar with 12 foot high clearance at the door, maybe even a shade under. I carefully drove the truck in watching the stack and it barely cleared with the exhaust cap flapping up. So I can safely say 12 feet at the tip of the exhaust covers it.

 

[Monkeyboyarmy]

Anyone get that dimension? What does it take to pull the exhaust stack off?

 

[Monkeyboyarmy]

Anyone??

 

[simp5782]

They are 143in tall with the pipe on it. Without it it is around 124in with the pipe removed and tires up. Its the same specs. Height, length and weight of a 916. With the exhaust pipe off it is under 10ft3 that is required for a step deck


Pipe simply unclamps

 

[Monkeyboyarmy]

Thanks Wes.