-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MV Restoration Shop Recommendations
- Thread starter tcody
- Start date
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Man I'd love to take on another one especally a 5 ton but I simply dont have the time or space...
Check with John Tennis... "Jtonka" I beleive is the name he uses on here... He's well known for doing good work and turning out quality. Saquashsanta has one of his bobbed deuces and raves about the work he did on it...
Keep in mind... when your talking something that big your in the 10 - 15,000$ range and higher for something done right... It all depends on how far you go and "good" you want the work to be.
Check with John Tennis... "Jtonka" I beleive is the name he uses on here... He's well known for doing good work and turning out quality. Saquashsanta has one of his bobbed deuces and raves about the work he did on it...
Keep in mind... when your talking something that big your in the 10 - 15,000$ range and higher for something done right... It all depends on how far you go and "good" you want the work to be.
alphadeltaromeo
Active member
- 1,901
- 3
- 38
- Location
- Alto, GA
Dman's right...jatonka does excellent work. I've been to his shop in NY and his work is really quite good.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Isn't there a shop in Indiana that does good work too?
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
MVRR is there but I don't know anything about them, their work, nor how they would treat a newer production vehicle. Prolly have to kick around G503 for some information on them. http://www.mv-restoration.com
John is kinda known for his heavy truck work... Where are he and I don't always see eye to eye on very much... or agree on much of anything at all... and are kinda in competition with each other business wise on some things... I would still have to recommend him over anyone else which should say a good bit about his ability and workmanship... He knows what he is doing and ya know what your going to get from him in return. That can say a lot when your deal with a truck so big and so bloody expensive to rework... Sometimes the transport cost is worth the project.
Memphis, Boyce, Clark, etc are good for prepping fire trucks and construction conversions, weekend crawlers and puddle jumpers but if your taking a true restoration or custom work I wouldn't trust them with it.
John is kinda known for his heavy truck work... Where are he and I don't always see eye to eye on very much... or agree on much of anything at all... and are kinda in competition with each other business wise on some things... I would still have to recommend him over anyone else which should say a good bit about his ability and workmanship... He knows what he is doing and ya know what your going to get from him in return. That can say a lot when your deal with a truck so big and so bloody expensive to rework... Sometimes the transport cost is worth the project.
Memphis, Boyce, Clark, etc are good for prepping fire trucks and construction conversions, weekend crawlers and puddle jumpers but if your taking a true restoration or custom work I wouldn't trust them with it.
m3a1_ht
New member
- 51
- 0
- 0
- Location
- Auburn, IN
Ron at MVRR is a real nice guy and has done wonderful work from what I've seen. Glen Greta of GI Trucks Inc in Laporte also does wonderful work. If someone is asking about good MV restoration work in Indiana, I would think that they are talking about one of them.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
MVRR is who I have heard of from more than a couple of people. I have only seen one truck they did and didn't see any flaws in workmanship. I was just trying to post options, not take away buisness from an active member.
475-2799- 1,825
- 80
- 48
- Location
- West Tennessee
RE: Re: MV Restoration Shop Recommendations
A few years ago I had a truck restored by Memphis Equipment in Memphis. I was pleased enough with their work that as I write this another one is sitting in their shop - I'll pick it up Monday. Some of my friends have also had their trucks done there (frame up), and were pleased with the results. Memphis has the facilities, tools, equipment and staff (20 or so mechanics work in their shop full time, on nothing but MVs) to do the job to whatever standards you specify. One thing that has impressed me is the speed with which they do the work (no doubt a result of the familiarity they have with the subject - plus all the special tools).
I've met and corresponded with John Tennis, and he is indeed knowledgable and seems honest - were he closer I'd certainly not hesitate to use him. I personnaly know Mike Howard with Liberty Restoration, and he is also honest and accomodating, but he lacks the familiarity with the ten ton that Memphis, and probably John, have.
Hope this helps,
David Doyle
A few years ago I had a truck restored by Memphis Equipment in Memphis. I was pleased enough with their work that as I write this another one is sitting in their shop - I'll pick it up Monday. Some of my friends have also had their trucks done there (frame up), and were pleased with the results. Memphis has the facilities, tools, equipment and staff (20 or so mechanics work in their shop full time, on nothing but MVs) to do the job to whatever standards you specify. One thing that has impressed me is the speed with which they do the work (no doubt a result of the familiarity they have with the subject - plus all the special tools).
I've met and corresponded with John Tennis, and he is indeed knowledgable and seems honest - were he closer I'd certainly not hesitate to use him. I personnaly know Mike Howard with Liberty Restoration, and he is also honest and accomodating, but he lacks the familiarity with the ten ton that Memphis, and probably John, have.
Hope this helps,
David Doyle
citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
RE: Re: MV Restoration Shop Recommendations
Another one to check into is Charles Tallbert owner of M series Rebuild in NC.. I have heard very good things about his work. He will not cut corners regardless..
Another one to check into is Charles Tallbert owner of M series Rebuild in NC.. I have heard very good things about his work. He will not cut corners regardless..
- 8,539
- 2,761
- 113
- Location
- Monrovia, Ca.
Re: RE: Re: MV Restoration Shop Recommendations
While browsing this thread, I thought I remembered reading an article in MV mag...couldn't remember who it was about. M-Series rebuild. That's who it was. I think it was 2 issues ago. Good write up.citizensoldier said:
littlebob
New member
- 1,548
- 26
- 0
- Location
- Baton Rouge LA
RE: Re: RE: Re: MV Restoration Shop Recommendations
All of my friends and coworkers ask what I'm going to do with the Deuce. How do You explain the 10ton and what model is it? After seeing pictures
I want one but it is way out of reach for now.
littlebob
All of my friends and coworkers ask what I'm going to do with the Deuce. How do You explain the 10ton and what model is it? After seeing pictures
I want one but it is way out of reach for now.
littlebob