harleyhouse
Well-known member
- 1,256
- 30
- 48
- Location
- Oakmont, Pennsylvania
I like the Lunette extention.
Nice work, trailer looks great!
Nice work, trailer looks great!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
my 1/4T trailer
- Thread starter BMThiker
- Start date
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
Nice
Be careful with that extended lunette eye. The additional length increases the torque arm and can bend the toungue.
Be careful with that extended lunette eye. The additional length increases the torque arm and can bend the toungue.
Danger Ranger
New member
- 2,253
- 23
- 0
- Location
- Roland, IA
True, maybe you should extend a brace out to the lunette shaft...
BMThiker
New member
- 18
- 0
- 1
- Location
- Atlanta, GA
Will certainly keep an eye on it. I can always reinforcing plates or angles to the tongue frame.
BMThiker
New member
- 18
- 0
- 1
- Location
- Atlanta, GA
Been meaning to post up some "action" shots for a while. This is from Thanksgiving weekend.
Danger Ranger
New member
- 2,253
- 23
- 0
- Location
- Roland, IA
Nice, what wheels are those on the FJ? They have a nice look to them.
BMThiker
New member
- 18
- 0
- 1
- Location
- Atlanta, GA
80-Series Land Cruiser knock-offs, custom powder coated. I have one OEM wheel because the set I bought (used) was only 4 wheels. The OEM wheel didn't clear my front calipers, so I had to "polish" it to make it work. It was just a slightly different casting on the hubside of the wheel that didn't clear the outer surface of the caliper. The non-OEM wheels clear just fine.
