• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

My 1942 Willys MB Hanger Queen

1943ht

Active member
478
94
28
Location
Clermont Florida 34711
Installed the siren today and she spins up nicely. Picked up my windshield glass and gasket material and knocked that out. A bit of a PITA, but overall I'm happy with the results. Also installed the patch panel floorboard on the drivers side. Paint Masks came in today so I'll be knocking that out this week. Waiting for my top bows.

IMG_20180605_182554.jpg IMG_20180605_182531.jpg IMG_20180605_182526.jpg
IMG_20180605_181400.jpg IMG_20180605_181345.jpg IMG_20180605_171642.jpg IMG_20180604_135705.jpg
 

M35A2-AZ

Well-known member
Steel Soldiers Supporter
3,222
392
83
Location
Tonopah, AZ
Mark, Great work on the Jeep! I just picked up a 1943 MB but it is going to need a lot of work.
 

1943ht

Active member
478
94
28
Location
Clermont Florida 34711
Doing lots of little but time consuming stuff ... waiting for my top bows .. installed my horn today just to make sure all fits and lines up ..will pull it off for paint. Radiator support rod bracket on radiator was missing, so scrounged one up from a damaged one that I had on the shelf. Got rid of the cheesy support the PO had installed to keep the radiator stable. Pulled speedo so I can get the new cable installed. Also installed a couple of brackets on the siren cable ... Most of the paint masks are complete, although I am a bit disappointed in how much paint slipped under the mask and will need to be touched up now. Have done several vehicles and this is the 1st time I've had this issue with my paint masks. Oh well, into every life :roll: .

IMG_20180610_142159.jpg IMG_20180416_165131.jpg MVIMG_20180610_142210.jpg
IMG_20180610_142240.jpg IMG_20180610_142348.jpg
 

M35A2-AZ

Well-known member
Steel Soldiers Supporter
3,222
392
83
Location
Tonopah, AZ
Can we see a couple of pics? [thumbzup]
These are the good sides of it. LOL It's going to be a long road to bring her back to life.
A little more rust then I would of liked. Looking for the right motor for it, it has a locked up
F- head in it now.
 

Attachments

1943ht

Active member
478
94
28
Location
Clermont Florida 34711
Got my new Arizona title for a 1942 Ford GPW and plates today. Original title I had when I picked her up was for a 1942 Willys. Just some cleanup of a couple of paint masks, add two more to the front bumper (My star and HQ-1) and I need to let the old canvas top sit out in the sun a bit to loosen up.

IMG_20180619_115540.jpg IMG_20180619_115549.jpg IMG_20180619_115559.jpg
IMG_20180619_115617.jpg MVIMG_20180619_115608.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks