Mystery part!!

[85CUCVtom]

Lets play a game of name that part!

I pulled my M1009 out of the garage Sunday and found this little guy under the vehicle. I have no idea where it came from- maybe someone here could help? There is a slight possibility it isn't even from my Blazer. I was removing an old garage door opener last week and maybe it fell out of that but I want to know for certain. Thanks fellas!

 

[cucvrus]

i never seen anything like that on a CUCV. Looks too small to be an exhaust manifold stud. You should have 3 on each side.

 

[85CUCVtom]

i never seen anything like that on a CUCV. Looks too small to be an exhaust manifold stud. You should have 3 on each side.

It’s 1/4-20 thread on the one end.


Sent from my iPhone using Tapatalk

 

[someoldmoose]

Is the threaded end intact or sheared off. At first glance it looks like the parking brake adjuster bolt.

 

[85CUCVtom]

Is the threaded end intact or sheared off. At first glance it looks like the parking brake adjuster bolt.

It could be sheared off- I’m not 100% positive, the part is at home and I’m at work


Sent from my iPhone using Tapatalk

 

[Tinstar]

The end looks sheared or snapped in the pic.

 

[85CUCVtom]

The end looks sheared or snapped in the pic.

It very well could be sheared off- it appears that way. I was in a hurry when I took the picture and don’t remember.


Sent from my iPhone using Tapatalk

 

[LT67]

Looks like the bolt that holds the camshaft in place

 

[nyoffroad]

Garage door part, square shank goes thru a pully or sheave on the overhead rod and holds spring tension. Have you open the door lately?

 

[85CUCVtom]

Garage door part, square shank goes thru a pully or sheave on the overhead rod and holds spring tension. Have you open the door lately?

Yeah I have. I removed an old opener the other day and I had a feeling it was from the door opener. It was suspect though because it was way under the truck. Figured I would ask around.


Sent from my iPhone using Tapatalk