NAPA part number for M416 axle U-bolts?

[maddawg308]

Does anyone know if there is a NAPA part number for the U-bolts that attach the springs to the axle on the M416 trailer?

If not, I need the correct size for them to get them made up ASAP. Also, will need the Ubolts that attach the front frame rails to the bed (these are square U-bolts).

 

[redcoat54th]

· Shock Absorbers (2 per trailer):
NAPA 94038 $29 ea.
*this is for a mid 1970's CJ-5 with a 4cyl engine
· Springs:
1950's vintage CJ3A/CJ3B FRONT leaf springs (36.25x1.75 inch leaf springs)
· Spring Eye Bushings:
1950's CJ3A/B Front leaf bushings
· Shackles:
1950's vintage CJ3A/CJ3B shackles.
Note there is a right and a left threaded shackle. You'll need one of each.
Available from JC Whitney or any jeep parts specialist. These are commonly
called "c-shackles"
· U-bolts:
Again, 1950's CJ3A/B U-bolts for a Dana 25 axle. You want the "skinny" u-bolt
as there is also a wide u-bolt to clear the pumpkin on a D25. With nuts, they
run about 3.60 each from Willys Jeep Parts, Restoration & Wiring from Walck's 4 Wheel Drive | Willys CJ2a, CJ5, Willys Truck, Wagon & Jeepster parts

 

[maddawg308]

Many thanks, redcoat! You're the man....