-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Navy 5 ton, shovel mount?
- Thread starter SandBar
- Start date
charlesmann
Well-known member
- 700
- 713
- 93
- Location
- Temple, Tx
Its part of the BII, basic issue items, standard on nearly, if not, all military vehicles, especially wheeled units. Its called a pioneer kit.
I'm not sure where the normal mounting position is on a dumper, but that's normal BII. On my M813, the rack is mounted on the toolbox on the passenger's side, under the bed.
Call, do not web browse this guy: https://www.army6x6parts.com/
He'll find and ship all your pioneer parts.
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Bracket what bracket?
Actually all Navy construction vehicles belong to the Seabees and would never be painted haze gray.
I was actually thinking about what all colors a 5 ton could have been painted. Air Force would have white ones right? What color would the Seabees have used?Bracket what bracket?
Actually all Navy construction vehicles belong to the Seabees and would never be painted haze gray.
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
This color. It might be FS14064. Air Force was strata blue FS25045
Attachments
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Yes that is strata blue. Lots of prep to get that color to look right because it is glossy.
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
what shovel/axe?
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
That US Marine or US Army "heavy equipment operator" tool on the side of the dump bed of the truck.
Surely you remember these Frank:
Any Truck Drivers in the group? - Hand Trucks moving boxes
Any Landscapers in the group? - Lawn Mowers that need to be pushed
Heavy Equipment Operators? - Shovels to move this pile of dirt from here to there
Any Police Officers? - Police the grounds. If it didn't grow there, pick it up
And there were a bunch more too...
.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
I would do an internet search of pioneer tools and rack. Cabell Garbee did a nice write up of these items on his site. I've not actually laid my eyes on that site for a decade but it's really good.
M49Cs had the pioneer rack mounted on the side of the body. My M817 had the pioneer rack mounted on an angle on top of the tool box on the left side behind the cab opposite the spare tire. M 818s have been seen with the pioneer rack either mounted horizontally on top of the tool box behind the cab or vertically inboard of the spare tire. The only time I ever saw a vehicle with the pioneer tools actually mounted on the rack was at a memorial day event in NGTC Sea Girt, NJ. Someplace on this planet there is a vast hole filled with OVM, cargo covers, bows and troop seats that have been separated from the vehicles they were issued with.
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
In the case of shovels, the vast hole is my warehouse, I think I have 2000.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
You should drop that number to 1998. Mine has bad wood and my sons M49A2C has nothing.
Same green that Marines used of the same era. I served in a Navy "littoral warfare" unit. We weren't Seabees but we had several of them in the unit. Several of our trucks were recycled from Seabee units.
When I first arrived, all of our stuff was old and busted. Vietnam up to 80's equipment. Then, 9/11 happened and we got all new everything. This means I got experience with the earliest HMMWV's CUCV's, M35A1's and 2's and an M813. We used canvas GP tents with pot belly stoves. Then we moved up to M35A3's, M939 series trucks, Base-X tents with HVAC and heavy capacity HMMWVs with comm shelters. It was all very "bouji" as my daughter would say.
I went out to my M813 yesterday, digging into the tool box for a wrench and it occurred to me to pass on some advice to you-
Build your own BII (beyond the pioneer tools). If that thing gets a flat or breaks down on the side of the road, you'll need tools to get moving again. Sure, I have a road side assistance and towing plan through Hagerty but it could take a long time to dispatch a commercial wrecker to tow me home.
In your tool box, you should have the following:
Build your own BII (beyond the pioneer tools). If that thing gets a flat or breaks down on the side of the road, you'll need tools to get moving again. Sure, I have a road side assistance and towing plan through Hagerty but it could take a long time to dispatch a commercial wrecker to tow me home.
In your tool box, you should have the following:
- Long air hose fitted to a gladhand for operating air tools and airing up tires (https://www.peshaqu.com/index.php?main_page=product_info&products_id=936501)
- Harbor Freight 20 ton air over hydraulic bottle jack (can be operated manually or by the air tool hose)
- Long, sturdy pry bar
- Lug wrench tool (take your pic, mil surplus or this: https://smile.amazon.com/ABN-Heavy-...+multiplying+lug+wrench&qid=1614353310&sr=8-6)
- Tool bag with large wrenches
- Tool box with various screw drivers, ratchets, sockets, allen wrenches etc. of various sizes, but larger than normal
- Lots of wood cribbage to build jack pads on uneven ground
- Diesel fuel additive of your choice (Stanadyne, Power Service, etc) because today's low sulfur diesel needs lubricity or you'll eat your fuel pumps
- Spare coolant and engine oil
- Spare 24v bulbs for all turn signals and brake lights