• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Need a 4500 lb. Vehicle Transported from IN to CA - Can anyone help?

harrison987

New member
2
0
0
Location
Los Angeles
Hey guys!!!

I need a NON-RUNNING WW2 German Tracked vehicle, as well as a cannon, moved from Indian to California...

Anyone out there who can help or refer?

Been getting some crazy quotes from large companies... :(

TIA!

:)

Mike
 

harrison987

New member
2
0
0
Location
Los Angeles
Hi!

Thanks for the reply!!!

:)

Vehicle is approx. 4500-5000 lbs or so. Width is 6.5 feet, height around 7 feet...length is 14 feet approx.

Cannon is small ...300lbs.

I have attached pics of both.

Would need some way of getting it onto the trailer though.

It has a front tow hook...and I may have access to a forklift...just not sure of how to go about it.

Ideally, a winch would have been perfect, as it could simply be pulled onto the trailer...

Thoughts?
 

Attachments

Last edited:

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,125
9,385
113
Location
Mason, TN
If it is around Indianapolis I know there is a member or two with a 925 in that area. I am sure they would be willing to help to take a peak at that thing. Check the member map.
 

NV555

Member
388
16
18
Location
Ely and Vegas Nevada
Those are about the same load out numbers as the M998 should fit on well. 98G Has moved a lot of stuff around I'm sure he has some good plans in the works already! Might be a good idea to tarp it as it will be drawing a lot of attention going down the road!

Very cool though thanks for the post!
 

royalflush55

Well-known member
Steel Soldiers Supporter
653
533
93
Location
Reydon, OK
Secure a snatch block to the front of the trailer with a chain. Fasten a cable to the tank then run it thru the block and get along side the trailer with another truck or tractor and pull it on. Same as a winch. Just make sure all components are rated for the load.
 
Top