need a bolt !!!!

[army_nurse]

So i am not sure how it happened but the retaining bolt for the emergency break to the truck left me. It is a one inch bolt that is aprox 6-7 inches long. it is fine thread. I am having problems finding one. can some one point me in the right direction. such a simple part and i am deadlined because of it, and there is snow on the ground. can you feel my pain.



Thanks for your help


God bless America


Mark

 

[dabtl]

You can find any hardware on the web at Grainger or McMaster-Carr

 

[papercu]

Check your TM 9-2320-361-24P or whichever one you have and post back a p/n or NSN. Wayne

 

[dabtl]

Bolt is # 7521283
Jam nut is #7539169

 

[gimpyrobb]

So I am no good at the TMs. Can you post a pic of what you need? I probably have it.

 

[G-Force]

Here are the specs on the boltlisted by dabtl: # 7521283

CharacteristicTHSD THREAD SERIES DESIGNATORUNSAHYM NOMINAL THREAD DIAMETER1.000 INCHESCMLP THREAD QUANTITY PER INCH14AAJD THREAD CLASS3AAAJF THREAD DIRECTIONRIGHT-HANDAASA THREAD LENGTH2.500 INCHES MINIMUMAASB FASTENER LENGTH6.125 INCHES NOMINALMATT MATERIALSTEEL OVERALLAASK HEAD STYLEC1 HEXAGONAASU HEAD HEIGHT0.500 INCHES NOMINALAATB WIDTH BETWEEN FLATS1.312 INCHES NOMINALCBBL FEATURES PROVIDEDFINISHED HEAD

The nut is: #7539169

BZRR THREAD SERIESUNSCQJX NOMINAL THREAD SIZE1.000 INCHESCMLP THREAD QUANTITY PER INCH14AAJD THREAD CLASS3BAAJF THREAD DIRECTIONRIGHT-HANDMATT MATERIALSTEEL OVERALLCQFM HARDNESS RATINGNOT RATEDACTA NUT STYLEA12 HEXAGONADEA NUT HEIGHT0.375 INCHES NOMINALASDB WIDTH ACROSS FLATS1.438 INCHES NOMINALCRTM BEARING SURFACE TYPEWASHER FACEDAZKQ TEMP RATINGNOT RATED

 

[Divemaster920]

TM 9-2520-246-34-1
Page 193 or 2-173
Part is not numbered but it is the one that goes in the "dog ears" of the outer brake shoe.
I have one.
Let me know. PM

I would just get a 1" bolt and put it in there.

 

[papercu]

Item number 30.

 

[Recovry4x4]

Is this what you are after? This bolt goes through the bottom of the ebrake shoes into a boss on the transfer case. FWIW there should also be a locknut on the inside but I failed to find one on the floor of the shop where I found this.

 

[army_nurse]

Recovry4x4


that is exactly what i am looking for. can you ship it too me i will pay you for the bolt and shipping. i am pretty sure i can find a lock washer. and sorry i couldnt get back on here but we have a nursing shortage and was called in to work several times.

 

[army_nurse]

and thank you to everyone for all the information and looking up all the stuff in the TM's. you have all been a great help to me a bit THANK YOU to all of you. May God bless you and your families in this new year.


Thanks again and God bless.


Mark

 

[Recovry4x4]

PM me your address and I'll get it out to you!

 

[Warthog]

I have one off of a parts truck here in OKC. Do you want it? As I will have to go out in the cold and remove it....LOL

 

[Scarecrow1]

4x4 you are the man that was quite impressive not only to provide the picture, but the part too . My hat goes off to you ..........