Need a d4d cat moved.

[nukem]

Need a quote for approximately 20k lb dozer moved from 32578 to 35603. Thanks

 

[simp5782]

335 miles at $2.08 a mile is $700. Assuming the dozer runs? Or does it need to be winched on?

 

[nukem]

Supposedly in use.

mill put my eyes and a:; on it before we make plans.

Sounds fair.

 

[unitedstatesoffreight]

The guy that quoted you above is solid, and $700 is a good price. Closest we'd be is in the $800's.

 

[fasttruck]

Get the dimensional data. If this thing has some honkin' blade on it could be a permit move.

 

[simp5782]

D4d's only have 8ft fixed blades

 

[fasttruck]

Reference post 6: 8' as built. Did someone farmer engineer an extension on it if they were grading lightweight material ? gotta ask ya know. I had a D69U with an 8 foot blade but the points on the lower corners made it wider which became an item of interest for DOTs with tape measures. And so on.

 

[simp5782]

Reference post 6: 8' as built. Did someone farmer engineer an extension on it if they were grading lightweight material ? gotta ask ya know. I had a D69U with an 8 foot blade but the points on the lower corners made it wider which became an item of interest for DOTs with tape measures. And so on.

I'm not too worried about it. I have annual oversized and overweight permits for every state in the southeast except FL

 

[Mullaney]

Need a quote for approximately 20k lb dozer moved from 32578 to 35603. Thanks

As a recent reference (4/12/2020) Simp5782 moved my m936 from Ohio to North Carolina. He is definitely a first class operator and knows his stuff! My truck was a very heavy vehicle too.