• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

need alternator bolt

trooper632

Member
535
5
18
Location
Utopia, TX
Hello all, I am in need of a cucv passenger side long alternator bolt. The M1008 I bought didnt have any alts, and the only bolt I cant find anywhere is the long bolt on the bottom of the pass side alt . Any leads on where I can get one or buy one from someone would greatly be appreciated.
 

K9Vic

Active member
1,261
7
38
Location
Fort Worth, TX
Do you need the spacer behind the mount also??
I would highly recommend it, I have seen the trucks with out them, but that spacer is designed to keep the alternator from moving in. So you should have it there to help stabilize it against tghe engine block. If you cannot find the part, most fastener stores have a like tube spacer, just get one that is the closest and use spacers to compensate the gap.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
240
63
Location
OKC, OK
I understand that you need a bolt, BUT with the thread title and your "need", this thread belongs in the Want Ad forum, not the CUCV Forum.

Want Ads are not allowed in the Open Forums.


By the way it is a metric
M10-1.5 - 169MM

http://bolts.tpub.com/252/01-150-9493.htm
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks