Need CUCV starter.

[camogriz]

I just picked up my 1986 CUCV Blazer from Wright Patterson, Ohio and flat towed it to Carmel, NY. No problems but there is no starter. Is there anyplace I can buy one? I see there are the later model 24 volt high-torque starters available on e-Bay, but I have been told these are not the best solution (possible flywheel damage issues). Any thoughts about the high-torque starters or availability of the older style large starters is greatly appreciated.

 

[mangus580]

Gear reduction starters are the best way to go. I have never heard of flywheel damage from them.

ODIron has them

http://www.odiron.com/store/product_info.php?cPath=17_39&products_id=87

I am not sure if any of the other parts dealers do.

 

[camogriz]

Thanks for the information. I can't wait to get the starter and see if it runs.

 

[acetomatoco]

Don't forget to use new bolts and torque them accurately and put on the front brace and have good batteries. Might as well put in a new fuel filter, too and check the glowplug operation before you burn up the new starter. When they start after a long crank you will love the noise and the smoke!!

 

[devilman96]

Don't forget to use new bolts DITTO DITTO DITTO!!!!

 

[camogriz]

Your tips are greatly appreciated.