Bravo2Uniform
Member
- 253
- 21
- 18
- Location
- McMinnville, TN
1986 M1028 - equipped with aftermarket snow plow and salt spreader. Those aftermarket items have been removed.
I have two mystery wires that I cannot find on the wiring diagrams. The first is a 3 Red wire with fuse link that goes from the far right of the firewall power block to nowhere (not the green headlight wire - a # 3 gauge red wire. Not shown on any schematics I've seen - probably for snow plow equipment). See picture.
The second is a LT Blue / Red with connector. I am assuming this has not been hooked up for a while it was blocked with grease and grime. It goes through the fire wall with the GP module wires but does not go to the GP module - goes to what appears to be ignition wires and terminates at a connector.
I have two mystery wires that I cannot find on the wiring diagrams. The first is a 3 Red wire with fuse link that goes from the far right of the firewall power block to nowhere (not the green headlight wire - a # 3 gauge red wire. Not shown on any schematics I've seen - probably for snow plow equipment). See picture.
The second is a LT Blue / Red with connector. I am assuming this has not been hooked up for a while it was blocked with grease and grime. It goes through the fire wall with the GP module wires but does not go to the GP module - goes to what appears to be ignition wires and terminates at a connector.
Last edited: