need LDT 465 Cooling tube to head gaskets

[acesneights1]

need LDT 465 coolant manifold outlet to head gaskets

So far I can only find complete engine gasket sets. I suppose I could snot them but I would rather have the correct gaskets. I have to change those two short little hoses which means I need to unbolt these two coolant manifolds from the heads.

 

[acesneights1]

Anyone know a valid part # ?
I'm not finding one.
tm 9 2320-209-20p shows it on page 111 in fig 51a but then the list on page 109 for Illustration 51a stops at 12 and the gasket is 16.

 

[acesneights1]

This guy cut his...these are what I mean.

http://www.steelsoldiers.com/showthread.php?146695-Water-Manifold-Rail-Coolant-Hose-too-Big/page2

 

[jbayer]

Anyone know a valid part # ?
I'm not finding one.
tm 9 2320-209-20p shows it on page 111 in fig 51a but then the list on page 109 for Illustration 51a stops at 12 and the gasket is 16.

Big M- https://www.bigmikesmotorpool.com/products/multifuel-water-manifold-gasket-10889853
TNJ - http://www.tnjmurray.com/militaryve...roduct/id/864F7069-0E5C-D071-F1A16538AC5658D2
OSHKOSH- http://www.oshkoshequipment.com/products/detail/44/5005/Water-Manifold-Gasket
OSHKOSH has the NSN on their site.

 

[cattlerepairman]

I learned (on this forum) that it is often simpler to just make your own, correct gaskets. Here is an article: https://www.hemmings.com/magazine/hsx/2010/04/Gasket-Making-101/3012301.html
You have the coolant manifolds to make the gaskets...I warn you, you might be shocked about how simple this really is. I do not have a hole punch. Larger holes...use a brass cartridge to stamp them out, smaller holes, use a paper hole punch or simply cut with exacto knife. It`s a hole, not a piece of art. Spray the newly made gaskets with gasket spray for added insurance, let dry and install.