Rebelpride
New member
- 468
- 5
- 0
- Location
- Thomasville, NC
Can anyone tell or show me how to take the bottom half of the intank fuel pump apart???
The part with the screens and impeller.
The part with the screens and impeller.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
NEED SOME HELP HERE
- Thread starter Rebelpride
- Start date
- 10,865
- 758
- 113
- Location
- Appomattox, VA
A quarter-pound of C-4 works nicely for this.
Rebelpride
New member
- 468
- 5
- 0
- Location
- Thomasville, NC
So it's not made to come apart?
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
According to the Army, no. But you can drill out the rivets and seperate the impeller assy from the motor.. Dont loose the little magnet though!
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
dismantle pump
there were 3 screws round the top holding mine together..it then turns freely in the top housing of the assembly,,but is held in? by the impeller? so i suppose there is a way to "free this" to dismantle completely?
there were 3 screws round the top holding mine together..it then turns freely in the top housing of the assembly,,but is held in? by the impeller? so i suppose there is a way to "free this" to dismantle completely?
Rebelpride
New member
- 468
- 5
- 0
- Location
- Thomasville, NC
Thanks emmado22 thats what I wanted to know.