- 3,569
- 3,473
- 113
- Location
- Brooklyn, NY
I am about to install a front winch and a rear airlift bumper on my 1987 HMMWV with some rusted bolts. Is there a decent battery impact wrench that I can purchase at Home Depot or Lowe’s that will work well.
I do not wish to bring my air compressor three stories down to my driveway.
Also what size is that huge nut I need to loosen to place the bumper supports and what size is the pintle crown nut?
Thank you In advance.
T
[EDIT May 04, 2021 - For future readers of this thread who don't want or need to dig deep to find the answer...
I purchased the Milwaukee 2767-20 after many many people on this and another forum recommended it. They were correct. It has been outstanding.]
I do not wish to bring my air compressor three stories down to my driveway.
Also what size is that huge nut I need to loosen to place the bumper supports and what size is the pintle crown nut?
Thank you In advance.
T
[EDIT May 04, 2021 - For future readers of this thread who don't want or need to dig deep to find the answer...
I purchased the Milwaukee 2767-20 after many many people on this and another forum recommended it. They were correct. It has been outstanding.]
Last edited: