DMF
New member
- 5
- 1
- 1
- Location
- Warren, MA
I have a transfer case from a 6x6 with split axles in my home-made skidder. The output shaft to the front axle is leaking. I removed the driveshaft and I need to buy a 1-1/2" socket to get the yoke off. Is that all I need to remove to get the seal out? There is a cover surrounding the seal with 4 bolts; does this need to be removed as well? Is there an exploded view/parts list available for this T-case? I looked in the TM forums but could not find any. Thanks in advance for your help!
Attachments
-
80.1 KB Views: 7