Needed a bit of assistance, to get the cucv home, no lights..

[84cucv1ton]

[h=2]Good afternoon guys,[/h]

hope everyone had a good christmas. I put my m1028 back on the road. used it the last few days. did the basic things, clean it up, new rubber hoses , fluids and filters. lights were working fine. i have tail lights and that it. no head or marker lights. truck is very clean. grounds look good. i will clean the wiring. didn't get that far yet.. any ideas? about 90 minutes from home. not driving all that way with no lights.​

 

[mike634]

Other than a bad ground or wire shorting on something I have no idea. What part of NJ are u in??

 

[Assel]

fuses? bulbs? blackout switch? service light switch? (sometimes wiggling on the switches could help)

 

[cucvrus]

Dimmer switch? Check ALL the fuses. The big 30 amp is know for this issue.

 

[84cucv1ton]

switches seem fine. all the fuses on the block are good. big 30 amp? that the one under the dash next to the starter relay? down in brick. need to get back to denville.

 

[MarcusOReallyus]

Yep, that's the one. Don't just check it visually. Sometimes it looks good but isn't, or is good but not making good contact.

 

[84cucv1ton]

ill see if i can dig one up. thanks

 

[84cucv1ton]

thanks for the help. i had AAA tow it to a friends house. ill get back on it monday night.

 

[m109a2]

Do yourself a favor buy a meter start with the source and work your way down.Al

 

[mike634]

I'm a good distance away up in Frankford