new centerfuge setup

[gunner_bear]

just bought a new centerfuge and did a bit of rigging today. 55 high,55 low and the fuge in the center> Wolverine tech looks very nice and home to try it soon.

 

[m16ty]

I've been planning on getting me a centrifuge for some time now because I've got a bunch of WMO (about 350gal) that needs to be filtered. I've thought about building one but I think I just going to break down and buy one. Where did you get your's from?

 

[gunner_bear]

Wolverine Technologies LLC Wolverine Centrifuge for WVO, WMO, Biodiesel very good to deal with

 

[Parablazer]

Very nice. Simple and effective. Can't wait to find out how much it will clean in an hour. Already bookmarked the site

 

[ElkHunter61523]

Just remember that you need a container big enough to hold the amount you have in the feed system. The power went out on me and I found it about 30 minutes later. The 5 gallon jug did not hold the 30 or so I have been feeding it with.

 

[frodobaggins]

Just remember that you need a container big enough to hold the amount you have in the feed system. The power went out on me and I found it about 30 minutes later. The 5 gallon jug did not hold the 30 or so I have been feeding it with.

That had to have been a mess. Did you happen to grab a pic ?

 

[ElkHunter61523]

No pics....too ****ed busy trying to stop the flow with wood ash, rags and what ever was close by. Near as I could guess, there was about 7.5 to 8 gallons all over the shop floor. I really didn't think that there was that much stuff in the way before this happened.

 

[gunner_bear]

i am using 55 gallon drums which is fine for the amount that i am going to do, just wondering on how to insulate and not have a fire or bulky mess

 

[Floridianson]

Gunner Bear let us know what you think after you have had a chance to play with it. I'm close to getting one from them.

 

[Ridgerunner]

Jeff, I'm curious on how the setup works myself. I currently have about 30-40 gallons of used oil here if you want to give it a go.

 

[gunner_bear]

just got the heat tank insulated with spray on foam last week. Will be putting it all togather this week and see if i can make it work

 

[jesusgatos]

What are you guys doing to get the metal particles out of WMO?

 

[gunner_bear]

got the barrel sprayed with expanding foam, time to start collecting oil

 

[frdmdfndr]

Subscribed