Privatewrench
Member
- 127
- 19
- 18
- Location
- Kentucky
Bought a Deuce from a close friend back in October. No brakes, so I did a complete rebuild of MC, air pack, new lines and new wheel cylinders. Removed the axles and bearing while I was there and cleaned and repacked everything with fresh grease. Just finished last night and rolled it down the drive for a test. Well, actually, I thought I was done a few days ago, but the brake fluid would dump out of my slobber tube in the engine compartment. After some digging on this site, I found out that the TM for rebuilding air pack has an error on placement of 2 similar seals. Took the air pack apart, swapped the seal, and brakes are good!
This site is a fantastic resource of information, Thank you all for contributing!