New gauge pack.

[Stevepsc]

Any issues replacing my older 60mph speedo and the rest of these gauges with the new set?

 

[juanprado]

I heard the speedo is electronic and need sender/ wiring harness? Not sure if temp needs a different sensor?

 

[snowtrac nome]

that's an uparmored set should work but the temp gauge will require the right sender when we retrofitted those in Iraq we got the gauge and sender as a set

 

[86humv]

Needs a harness and a sending unit for that speedometer.
I have sending units available.

 

[Action]

the temp gauge will work, but it wont be accurate.
there is a harness that runs from sender on t/c to the speedo.

 

[doghead]

How fast will a humvee go off road?

 

[snowtrac nome]

never got to play with the electronic speedometers replaced a ton of cables routed wrong though

 

[Jakob1944]

never got to play with the electronic speedometers replaced a ton of cables routed wrong though

Routed wrong where, if I might ask......It appears mine is been replaced....at least that's what the 2 photos show......Mechanical speedo, M998a1

 

[Action]

How fast will a humvee go off road?

if a cliff is considered off-toad, then pretty fast.

 

[snowtrac nome]

pm me and I will dig up photos I grabbed while deployed off new rigs showing how things were supposed to be done the big problem is gi's and contractors run the cable the easy way down to the trans and it gets melted by the exhaust.

 

[Stevepsc]

What do the sending units go for? Shipped to 29527.

 

[Stevepsc]

I was able to convert my off-road sf-97 to on road title and tag in SC. So mine will currently run 66. I am swapping my 6.5na and 3 speed to 6.5 turbo and 4 speed tranny so I hope to make 75. I have also scored a set of the newer goodyear Kevlar walled radials with the newer run-flats. Had them balanced so maybe I won't shake the rig apart on the interstate!!

 

[JetbikeAnt]

Hello Gents. Anyone have the part number for the needed electrical harness and drive? I think I'm gonna do this, but can't find it in the TM's. Only the cable drive is listed from what I saw. Thanks!

 

[Action]

Hello Gents. Anyone have the part number for the needed electrical harness and drive? I think I'm gonna do this, but can't find it in the TM's. Only the cable drive is listed from what I saw. Thanks!

use TM 9-2320-387-24p instead of the -280

 

[JetbikeAnt]

use TM 9-2320-387-24p instead of the -280

Hello Action. As always, thank you for the assistance. I downloaded the suggested manual and I still can't find it. Only the cable drive version. If you have time can you show me where I'm screwing up? Thanks!

 

[Action]

Hello Action. As always, thank you for the assistance. I downloaded the suggested manual and I still can't find it. Only the cable drive version. If you have time can you show me where I'm screwing up? Thanks!

The cable is figure 267. The electric speedo harness is the next image, figure 267A.