rustystud
Well-known member
- 9,280
- 2,987
- 113
- Location
- Woodinville, Washington
Hey Chris, do you have the part number for the stronger bearing ?There is 2 bearings available for the input. Get the one with more balls, literally.
Thanks.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
new injectors and fdc bypassed
- Thread starter m715
- Start date
Thanks.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Check post #9 here:
https://www.steelsoldiers.com/showthread.php?52980-Leak-from-the-Bellhousing
I'll see what I can find during the day Wed.
I've also found m35 tom mentioned:
bearing # is 1308SL
NTN/NSK part number: BL308 ZNR
https://www.steelsoldiers.com/showthread.php?52980-Leak-from-the-Bellhousing
I'll see what I can find during the day Wed.
I've also found m35 tom mentioned:
bearing # is 1308SL
NTN/NSK part number: BL308 ZNR
Last edited:
m715
Member
- 237
- 16
- 18
- Location
- western ma.
Thanks, gimp. I am already on the hunt for parts. I need to find the pilot bushing, anyone know where to get one?
m715
Member
- 237
- 16
- 18
- Location
- western ma.
I am gathering up the parts I WILL need and the ones I MAY need. A clutch kit with TO berring a pilot bushing, rear main oil seal and a tranny gasket set. I have a winch so I have a pto tranny. I have a spare tranny I was told was rebuilt but it does not have a pto.
m715
Member
- 237
- 16
- 18
- Location
- western ma.
Because I need to drive my truck I added a quart of Lucas To the tranny. After driving for a half hour I noticed the noise was much less and it shifted much smoother. I know this is not a fix, I just want to nurse a few more miles until I get all the parts. I think part of the original problem was my transmission was low on oil before I bought it. I have no previous history of how the truck was maintained.
rustystud
Well-known member
- 9,280
- 2,987
- 113
- Location
- Woodinville, Washington
I think part of the original problem was my transmission was low on oil before I bought it. I have no previous history of how the truck was maintained.[/QUOTE]
That is the biggest thing to worry about in all our trucks. We don't know how it was maintained. Mine was bought straight from the military base, but that doesn't mean that all work was performed. Some could have been "put on hold" since it was to be sold. At Metro we did that all the time when a bus was to be auctioned off. Why put in good money and time in a vehicle that is going away.
That is why it is so vitally important to totally check out your truck when you first get it. All brakes must be checked. All fluid levels must be checked or in the case of the engine replaced. Including ALL filters. Check and lube ALL fittings. This really helps in discovering problems. I didn't drive my truck for a year after I brought it home. Yes I drove it home, but then I started on my total check program. It took me a year to totally go after all the things mentioned. I know most guys just buy them and drive them until a problem occurs. That works until the problem cost thousands to fix and could have been prevented in the first place with just a simple filter or something else just as silly.
OK time to get off my soapbox.
That is the biggest thing to worry about in all our trucks. We don't know how it was maintained. Mine was bought straight from the military base, but that doesn't mean that all work was performed. Some could have been "put on hold" since it was to be sold. At Metro we did that all the time when a bus was to be auctioned off. Why put in good money and time in a vehicle that is going away.
That is why it is so vitally important to totally check out your truck when you first get it. All brakes must be checked. All fluid levels must be checked or in the case of the engine replaced. Including ALL filters. Check and lube ALL fittings. This really helps in discovering problems. I didn't drive my truck for a year after I brought it home. Yes I drove it home, but then I started on my total check program. It took me a year to totally go after all the things mentioned. I know most guys just buy them and drive them until a problem occurs. That works until the problem cost thousands to fix and could have been prevented in the first place with just a simple filter or something else just as silly.
OK time to get off my soapbox.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Sounds like your related to Statler or Waldorf, which is it?
BWAAAAAAhahahahahahahaha
BWAAAAAAhahahahahahahaha
rustystud
Well-known member
- 9,280
- 2,987
- 113
- Location
- Woodinville, Washington
jbayer
Member
- 675
- 7
- 18
- Location
- St. Aug., FL/ McGrady, NC
rustystud
Well-known member
- 9,280
- 2,987
- 113
- Location
- Woodinville, Washington
OK. I thought they where some steel soldiers guys. I'm too old to have watched the muppets. Or Sesame Street or whatever the show they where on. I watched "Howdy Doody" and the original "mousekateers" . Also the original "Flash Gordan" shows where great !