• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

New member and mep-806b owner

Wh6czu

Member
52
2
8
Location
Kentucky
Hi Carl here in Kentucky, new member and new owner of two Mep- 806 B's.
Looking for help getting them running. The problem I'm having is no voltage at the PI fuel shut off. Anyone have this problem ? Can't find anything in the TM.
 

AZK9

Active member
1,083
6
38
Location
PRC, AZ
Hi Carl. Welcome from Arizona!

I don't know much about your particular generator set, but I've got a buddy who owns one that (last I heard) was still in good running condition and 'hooked-up' to his workshop as a backup power system. I'll try to contact him and run your 'problem' by him. Maybe he can help. I'll let you know if I have anything positive to report. :)
 

AZK9

Active member
1,083
6
38
Location
PRC, AZ
Hello again, Carl.

I was unable to reach my friend, however, I left a message for him.

I also searched the site for a TM for your unit. Can't seem to find it here, so searched the web
and came up with the TM attached below.

I don't have much time to read it, but section II [3-1] is a troubleshooting section that might help.

If I learn more that might help you... I'll relay the info.

Good luck.:D
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks