jcorral0928
New member
- 1
- 2
- 3
- Location
- Scottsdale, Arizona
Just picked up a 1942 ford pickup modified for ww2. There is one problem in my way, passenger side drums must be rusted solid.im told it’s a 1 1/2 x 13/16 budds. Any info would be amazing
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
New member from Arizona 42 ford dually
- Thread starter jcorral0928
- Start date
- 10,691
- 7,107
- 113
- Location
- Camp Wood/LC, TX
Welcome, those are called model G8T. The rear axle is made by Timken. What happens with the brake drum is the brake fluid leaks out of the wheel cylinder and causes the shoes to stick to the drum. Lots of beating and prying will get things loose. You should have military data plates on the dash.
- 2,104
- 669
- 113
- Location
- Orlando, FL
I had a 1950 F-3 and there were countersunk screws attaching the brake drums to the hubs. If there are screws, they get stuck. Heat the screw head with a torch until it glows and then it will unscrew easily.