New member

[ClayG32]

Hey I’m a new member. I have a M1009. It’s been running great and then it started not wanting to crank. I would drive it all day then jump back in and nothing at the ignition then 10 minutes later she would crank up but now it doesn’t want to start at all. I could hear the glow plug solenoid engaging but no ignition. If anyone could give any tips I’d appreciate it. My number is 229201 3503

 

[Tinstar]

Welcome to SteelSoliders.

Cranking and not starting?
Or not wanting to crank?

Make sure battery’s are charged and alternators are both working.

Recommend you Start there.

 

[Mullaney]

Hey I’m a new member. I have a M1009. It’s been running great and then it started not wanting to crank. I would drive it all day then jump back in and nothing at the ignition then 10 minutes later she would crank up but now it doesn’t want to start at all. I could hear the glow plug solenoid engaging but no ignition. If anyone could give any tips I’d appreciate it. My number is 229201 3503

.
Welcome to the outfit!

Sadly, I know very little about the truck you are working on - but there are a bunch of posts about these trucks.

There are a lot of folks on here that can offer suggestions too.
More details might get more responses too...

 

[Lothar]

Post deleted

 

[german m1008]

......starter.....

 

[kendelrio]

Great looking truck and welcome to the site! As as stated above, a little clarity on the issue please.

 

[MarcusOReallyus]

Sadly, I know very little about the truck you are working on - but there are a bunch of posts about these trucks.

Under the hood, same as the M1008 or M1028. The M1010 is the maverick in the bunch.