ballencd
Active member
- 190
- 76
- 28
- Location
- Columbus, NC
I got my 1984 M1010 running. The fuel tank was emptied and fresh fuel put in with a bit of Marvel Mystery Oil. It also has a new fuel filter in place. For the record I did start it before changing the fuel or filter .....maybe not a good idea. It starts up pretty good when cold after three 4 second hits on the glow plugs...no ether. It idles a little high but seems to run OK. If I rev it up at all when it is cold it tries to stall. After a ten minute warm up it is still trying to stall. If I drive it and let off the pedal quickly it will stall. It starts right back up. When it gets to full operating temps it seems to do better but still hesitates a bit like it wants to stall. When pressing on the pedal it sometimes wants to rev up real fast but not always. What do I do first.