LmtvPR
Member
- 32
- 23
- 8
- Location
- Puerto Rico
Do you have the numbered wire info so I know what to test?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
NO Power to 1078A1 LMTV
- Thread starter LmtvPR
- Start date
Ronmar
Well-known member
- 3,886
- 7,550
- 113
- Location
- Port angeles wa
Not for an A1. It should be very similar to the A0 as the wiring at the starter is basically the same, but I have nothing specific to confirm that. The starter replace procedure is in chapter 7 which is in the 20-3 manual. You can download all the A0 manuals up in the manuals section.
LmtvPR
Member
- 32
- 23
- 8
- Location
- Puerto Rico
Ok so today I finally started looking at the truck in more detail as I was realizing my employee just wasentngoing to figure it out and I found a broken negative cable from the battery to the starter/chassis ground. This totally explains my voltage issue and plan to have it repaired tomorrow. I’m hoping this fix will get my truck started. I’m a little bummed I bought so many parts trying to figure this out but thankful I have spares for future use. Thanks everyone for the help and pointing me in the direction of checking wires.
