davesgmc
Active member
- 833
- 131
- 43
- Location
- Mclouth, KS
my 5 ton with a deuce bed has no troop seats. I made some wooden uprights to hold the top bows and corners so could put a top on. But I decided I might not want the top on all the time so I wanted some real troop seats. I couldn't find any reasonably priced or close enough that I could get right away. So i decided I don't need real troop seats just some good looking sides.
I made them from 5/4 cca treated wood as sides. All the wood I used was treated wood. used a table saw to split them in 1/2. routed the edges round and used the wooden uprights i made to hold the top bows and corners. I had to leave a bit sticking up so as to attach the corners to, but still not bad and its rock solid! I will let is set and season a bit and paint it in a few weeks when I paint the rest of the truck.
I made them from 5/4 cca treated wood as sides. All the wood I used was treated wood. used a table saw to split them in 1/2. routed the edges round and used the wooden uprights i made to hold the top bows and corners. I had to leave a bit sticking up so as to attach the corners to, but still not bad and its rock solid! I will let is set and season a bit and paint it in a few weeks when I paint the rest of the truck.
Attachments
-
47.1 KB Views: 148
-
69.9 KB Views: 139
-
69.8 KB Views: 135
-
93.8 KB Views: 132