Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
[FONT="]Problem is that I have to replace that O-Ring every year and ½ to 2 years it just starts to break apart. Everything else in the carb is fine. I hate to spend so much for the carb kits. All I can figure is its crappie gas.[/FONT]
Alky in the gas. Also check the sealing surface where the o-ring contacts the needle valve and inside the carb. One might have a burr and as a result getting the o-ring. I'll look thru my parts bin and see if i can measure a 0-ring for you.
Bob