Official 2015 Ga. Rally buy/sell/trade thread

[73m819]

The foot is the old double end you can switch from 3/4 to 1 inch to tow a vehicle the one I have has too much play in afraid a pin will break

I would not use those double adaptors for anything but VERY LITE applications, they are just not strong enough to keep from spreading under heavy load.

 

[73m819]

I am looking for 4 of the cab outside grab hand holds, these are mounted on the tub just before or right at the corner curve

 

[73m819]

Some of those were made with one and one-eighth pin holes for the m113 tow bar. I know some have milled them down to work with the "regular" medium tow bar. Is the hole wallered out or is it round?

The set I HAD had 1" tb holes, both the 1" and the 3/4" attachment holes were nice and round, just both adaptors had spread some.

 

[CARNAC]

Just to keep this thread on topic, here is the thread from awhile back about Y feet.

http://www.steelsoldiers.com/showth...-and-1-in-feet)-Safety/page2&highlight=Y+feet

 

[MDSA]

Yeah, I gotcha, not the style I have .

 

[joeM62]

Would anybody have the 1inch feet I'll buy a pair
And gimpy if you still have those lights from the last rally hard rubber housing I'll buy a pair from you

 

[gimpyrobb]

Still have a few! I'll make sure you get some.

 

[hndrsonj]

Looking for duce gauges

Joe, look on ebay. I just listed a NOS panel w/gauges.

 

[glassk]

Looking for M114 parts:
1. Hyd pump
2. Track sections
3. Rear hatch
4. Front armor plate
5. Engine bay grate
6. cupola

Other parts:
M35A2 hard tops
M35A2 windsheild assemblies with good glass
Good 14.00R20's

Vehicles I'm looking for:
Equipment trailer I can pull the M114 on

Not sure what pump you need, think this is a lube pump, for the tracked cargo carrier, welcome to one if you can use it,

 

[Recovry4x4]

I will have an M101 top in camo and fiberglass racks with metal bows. All in good shape except one bow corner has some rust. Side racks are both the same side which means the bow storage pockets are in the wrong place but still very functional. Will not separate. $150. Also looking for a ride for a Hardigg field desk to TX for Rory.

Spoken for by timntrucks

 

[MDSA]

Looking for an M35 soft top. Just the soft top. Already have the frame.

 

[zebedee]

20 ton NORCO bottle jacks (no handle) Genuine Bii kit - Made in USA........... $65

Cadillac ISU 90/60 container; shelf brackets (packs of 4 = one shelf)......... $18

5 ton transfer case; lever extension (with round knob) for 'split shifting' .... have to forge these so orders in advance please..... $30

2 Medium towbars - non telescoping type, no feet...... $ offers

 

[timntrucks]

ill take the top. bows and sides kenny

 

[joeM62]

I've got a pair of old style towbar feet the 3/4 and 1 inch ones a they are in good shape. $120 OBO May have pins to go with it

 

[tennmogger]

Need one steel wheel with CTIS stuff for an LMTV.

 

[SCSG-G4]

35 Scepter fuel cans, about new condition. $50 for one, 2 or 3 at a time $45 each, four or more at a time $40 each. At the Rally or local pickup before (if you think fuel prices are headed back up). Can also deliver gratis to the VA Rally over Labor Day weekend for the same prices.

 

[Recovry4x4]

Mike, what color are the fuel cans?

 

[timntrucks]

mike ill take 4 plastic fuel cans

 

[davidhdale]

Mike i will take 2cans

 

[Recovry4x4]

Guess I better commit to 4, regardless of color, before they are all spoken for.