Official 2017 Ga. Military Vehicle Rally buy-sell-trade thread

[DanM7890]

To sell:
(4) Plastic storage containers 23" x 38" x 23" ($120 each)
LMTV M1082 trailer ($1200)
M1061 5-ton flatbed trailer with corner jacks ($2000)
LMTV cargo cover frame (older heavy metal type) ($400)

M1082 sold, storage containers are now $100 and I have a lot of them now. M1061 is now $1800.

 

[Recovry4x4]

I am seeking a rustless CUCV hood if anyone has such laying about. Might also be interested in a grill guard.

I am still seeking these items if anyone has them in their trash heap.

Reminder to all folks. If you are buying, swapping selling or giving away anything in this thread, please make certain that you conspicuusly post your screen name on your vehicle, campsite or area of operation so that folks can find you.

Please complete your deals. If your situation has changed and you can't, have the courtesy to notify the seller. It really sucks to be holding the widget everyone wants, for Soldier B, only to find out same spent his money on prophalactics and can't close the deal. Now it's too late to find all the suiters that came along earlier and your stuck with the widget.

 

[juanprado]

I am still seeking these items if anyone has them in their trash heap.

Reminder to all folks. If you are buying, swapping selling or giving away anything in this thread, please make certain that you conspicuusly post your screen name on your vehicle, campsite or area of operation so that folks can find you.

Please complete your deals. If your situation has changed and you can't, have the courtesy to notify the seller. It really sucks to be holding the widget everyone wants, for Soldier B, only to find out same spent his money on prophalactics and can't close the deal. Now it's too late to find all the suiters that came along earlier and your stuck with the widget.

GoldnEagle might be parting a white cucv with a rust free hood that has a small dent and same truck has a brushguard. I am iffy on attending but TimNtrucks has been known to run the LA branch of the ss freight lines and since I have not burdened him yet with any of my treasures, might have room.

 

[Recovry4x4]

Thanks Juan, I will investigate.

 

[CARNAC]

Does anyone have any cargo tamers (cargo nets) for sale?

 

[Csm Davis]

I am going through all of my trucks trying to see what all I need to get them complete and running and found I am just a few parts shy of having all the tops I need. I need 1-2 of the cab bows as shown, and the part that goes from the door post to the windshield for the drivers side. The one shown is for the passenger side, somehow I got two of them and short one driver.

I have a stack of those, will bring you some and a few more to sell

Sent from my SM-G930V using Tapatalk

 

[TaylorTradingCo]

Thanks Jeff.

Derek

I have a stack of those, will bring you some and a few more to sell

Sent from my SM-G930V using Tapatalk

 

[Recovry4x4]

Does anyone have any cargo tamers (cargo nets) for sale?

I do not know if he is coming but Stonepicker1 had a stash a few whiles ago.

 

[timntrucks]

ok it looks like im coming. depends on what sells if i go in a car or a pickup truck..
2 deuce snatch blocks
1 ladder off a m750 fits a deuce nicely(sold)
100 ft of the large wire off a m750
new in the box glass for a deuce windshield(sold)
a NOS passenger door for a deuce or 5 ton(sold)
818 transfer case low miles
wrecker chains.. 3/4 and 5/8s
corners for a deuce cargo cover bows(sold)

im looking for a green 105 top

 

[wheelspinner]

ok it looks like im coming. depends on what sells if i go in a car or a pickup truck..
2 deuce snatch blocks
1 ladder off a m750 fits a deuce nicely
100 ft of the large wire off a m750
new in the box glass for a deuce windshield
a NOS passenger door for a deuce or 5 ton
818 transfer case low miles
wrecker chains.. 3/4 and 5/8s
corners for a deuce cargo cover bows

im looking for a green 105 top

.

 

[Reckless]

5 ton troop seats and bows. (Both side rails, front rails and however many bows are pictured) - $200

4 - BRAND NEW MRAP reclining seats with head rests, height controls, and sliding seat tracks - $275 per seat or $1000 for all 4. (lowest price online is 350 plus shipping) NSN 2540-01-537-4375

2- M939 series door shells (no rust) - $50 each


LMTV storage boxes $50 each with contents $125 ea

Prices will be paid in full via gift on PayPal or cover the 3.5% fees. I will not bring anything to the rally unless it is paid for.

 

[Swamp Donkey]

LMTV storage boxes $50 each with contents $125 ea

Pictures of boxes and contents?

 

[Coffey1]

It's a mystery box Swampy.
Like a box of chocolates lol.

 

[Reckless]

Pretty much. Some gaskets, seals, maybe a mirror, maybe a throttle cable. If I felt like going through I would sell individually. I put it all in there for storage a while back.


Also have a M923 3 color camo tarp. Has some fading on the top and thin in some areas. $250.

 

[wheelspinner]

KIT APPLICABLE TO 2-1/2 TON M44A2 AND 5 TON M39, M39A1, M39A2, M809, M939 AND M939A1 SERIES VEHICLES

Brand new in the box convoy light kit. I bought two. The other is still sealed. The boxes were sitting in a warehouse for 15 years so I opened the one I was keeping to check inside. Everything is perfect. The lights are even sealed in plastic.

I may may not bring it if not paid ahead.

$300 sealed in the box.

 

[simp5782]

395 goodyear MVT tires brought to the rally. Tires are $150 for 98 percent or better. $100 for 90 percents. Shipping is $10 per tire.

16.00s i will be posting pics of. 95 to 100 percent XZLs $175ea 85 percents are 120ea. plus 15 per tire to be moved there.
Date coded 2010 and newer


I will post pics of the 16.00s this week.

Sent from my SM-G935P using Tapatalk

 

[TaylorTradingCo]

NOS multi-fuel injectors

I just made a rather large acquisition of NOS fuel injectors for the multi-fuel engines. I will be having a GA SS Rally special sale price of $20 each.

 

[TaylorTradingCo]

bed side & top hardware

I also bought 4 pallets of misc. truck and trailer bed side and top components, so it you need a piece, part, or whole, let me know what you need and I will see if I got it.
Derek

 

[TaylorTradingCo]

winch

As for this winch which several of you have asked about, thanks to the ever knowledgeable and helpful Gringeltaube aka Gerhard, I have now tested it and completely taken it apart and maintained it. Now I am not sure if I want to sell it or not, so for the moment it is on hold while I try to figure out where I could put it on a truck.
Derek

 

[Dock Rocker]

As for this winch which several of you have asked about, thanks to the ever knowledgeable and helpful Gringeltaube aka Gerhard, I have now tested it and completely taken it apart and maintained it. Now I am not sure if I want to sell it or not, so for the moment it is on hold while I try to figure out where I could put it on a truck.
Derek

If you decide to sell I will take it. I can't make the rally but CSM Davis said he would provide transport.


Sent from my iPhone using Tapatalk