• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Official 2021 Georgia Military Vehicle Rally swap meet thread

microjeep

In Memorial
In Memorial
850
466
63
Location
blairsville ga.
I'm cleaning house now that I sold my Deuce
Below are some of the items I'll be bringing up on Saturday.
I haven't kept up on prices but I think I priced these fairly

1ea, Medium towbar with 3/4" & 1" feet . One tube has a slight bend which keeps inner bar from sliding in to last hole ( see pic ) $400.00 for all.

1ea, NOS front M-35 "A2" wiring harness. $300.00

1set, Used armored headlights ( both high and low beam work ) $85.00

1ea, Geared lug wrench w/bars, $90.00

1ea, NOS grill winter cover $50.00

1ea, NOS 24v MRE heater pouch, $40.00

1ea, NOS M-35 ( & 5 ton ) rifle rack. $40.00

1ea, used 5 ton front bumper ( straight ) $100.00

1ea, used M-151 in cab heater $35.00

4ea, New M-35 rear axle spring U-bolts with nuts $60.00

1ea, Used (8"?) snatch block, $75.00

And a bunch of smalls that I've picked up over the years
I'll take the 5-ton bumper please
 

Elijah95

Certified Rookie
1,239
1,183
113
Location
Georgia
I'm cleaning house now that I sold my Deuce
Below are some of the items I'll be bringing up on Saturday.
I haven't kept up on prices but I think I priced these fairly

1ea, Medium towbar with 3/4" & 1" feet . One tube has a slight bend which keeps inner bar from sliding in to last hole ( see pic ) $400.00 for all.

1ea, NOS front M-35 "A2" wiring harness. $300.00

1set, Used armored headlights ( both high and low beam work ) $85.00

1ea, Geared lug wrench w/bars, $90.00

1ea, NOS grill winter cover $50.00

1ea, NOS 24v MRE heater pouch, $40.00

1ea, NOS M-35 ( & 5 ton ) rifle rack. $40.00

1ea, used 5 ton front bumper ( straight ) $100.00

1ea, used M-151 in cab heater $35.00

4ea, New M-35 rear axle spring U-bolts with nuts $60.00

1ea, Used (8"?) snatch block, $75.00

And a bunch of smalls that I've picked up over the years
Hey Bill, I’ll take the winter cover!

Also, I’d say reserve the wiring harness too!
I’ll send you a PM momentarily


Sent from my iPhone using Tapatalk
 

TaylorTradingCo

Active member
586
68
28
Location
Ringgold, GA
I have a lot of tires and a few wheels I can bring if sold.

A3 six lug super single factory wheels $150 each, 7 available

MRAP wheels $50 each, 7 available

tires:
900-20 NDT mounted
1100-20 NDT mounted
1100R20 Goodyear G177 mounted
1100R20 Firestone T831 loose
395/85R20 Michelin XZL loose
1400R20 Michelin XZL loose
1600R20 Michelin XZL loose

Text me for pricing, Derek 423-255-6509
 

Attachments

Last edited:

TaylorTradingCo

Active member
586
68
28
Location
Ringgold, GA
I have tons of M151 Mutt parts; front bumpers, grilles, fording parts (air intake & exhaust), seat frames and cushions, door skins/frames, heater parts, bumperettes, tranny covers, pintle hitches, battery box vovers, distributors, lights, dash panels, axles, differentials, shackles, differential guards, radiators, hard top, ... pretty much everything but body parts. I am not bringing this stuff unless spoken for.
 

Attachments

TaylorTradingCo

Active member
586
68
28
Location
Ringgold, GA
I have a 24v multifuel heater with cool heat shroud to go in the back of a truck bed/box.

I have several PTO's and various parts.

I have some aluminum USMC water jerry cans, and some other USMC and WWII, will only bring is spoken for.

I have several parts Deuces, so if you need something off one, let me know, but no axles left.
 

Attachments

TaylorTradingCo

Active member
586
68
28
Location
Ringgold, GA
I have several vehicles and trailers available:
M36A2 with 17' hardside expansion van body
1955 IH M62 wrecker gasser
M715 Jeep truck
a couple of Ford WWII bomb trucks
1962 Studebaker/Packard M35A1? 1st year multifuel?
HAWK missile control trailer
M101 trailer
M36A2 LWB truck, no bed
Air Force flight line van

I probably can't bring these, but deals can be made.

I am interested in 5-ton trucks/parts, especially dump trucks.
 

Attachments

Day Tripper

Member
91
21
8
Location
Rockford, Ohio
I have several vehicles and trailers available:
M36A2 with 17' hardside expansion van body
1955 IH M62 wrecker gasser
M715 Jeep truck
a couple of Ford WWII bomb trucks
1962 Studebaker/Packard M35A1? 1st year multifuel?
HAWK missile control trailer
M101 trailer
M36A2 LWB truck, no bed
Air Force flight line van

I probably can't bring these, but deals can be made.

I am interested in 5-ton trucks/parts, especially dump trucks.
What are you asking for the M715 and what kind of shape is it in?
 

Elijah95

Certified Rookie
1,239
1,183
113
Location
Georgia
I have a spare tire carrier assembly for a M931A0 $100
(2) mep003s on a trailer non running (fuel system needs cleaning out and other things before firing them off) $3000 with m35a3 wheels and spare

Parting out a m939 truck, was formerly a gun truck with cross bars and back plate still installed. IMG_6366.jpg
tires are excellent, engine runs but has coolant in oil, Will only deliver parts to rally if paid in advance or local pickup near senoia georgiaIMG_6437.jpg
IMG_4331.jpg
IMG_4330.jpg
IMG_4340.jpg
IMG_6368.jpg
IMG_6372.jpg


Sent from my iPhone using Tapatalk
 

TaylorTradingCo

Active member
586
68
28
Location
Ringgold, GA
What are you asking for the M715 and what kind of shape is it in?
$2850, It is partially dissassembled where some rust spots were being patched, but pretty much complete other than canvas and seat cushions. Previous owner (member on here) said he had it running off a gas can. It still has a couple if spots that need patched in the cab floor, and I think it needs new windshield glass. Text me at 423-255-6509 for more detailed pics if interested.
 

timntrucks

Well-known member
Steel Soldiers Supporter
4,041
116
63
Location
Ponchatoula LA
I have a gal of dot 5 brake fluid. 2 mud flaps,mkt parts.. screens, burners,inverter, wires,cambros,griddle. 4-- 1/2 new chains for strapping down( the new type 70k pound ones) a fuel selector valve off a 818 2 water cans. a set of rollers off a 5ton winch. a duece rear drive axle and hub. only will bring them if spoken for
 

Lawdog734

Active member
241
44
28
Location
Colbert, GA
I have tons of M151 Mutt parts; front bumpers, grilles, fording parts (air intake & exhaust), seat frames and cushions, door skins/frames, heater parts, bumperettes, tranny covers, pintle hitches, battery box vovers, distributors, lights, dash panels, axles, differentials, shackles, differential guards, radiators, hard top, ... pretty much everything but body parts. I am not bringing this stuff unless spoken for.
Whatcha got in the way of MUTT door skins and frames? Looking for NOS vinyl doors if ya have them, but definitely need the frames too.
 

Maddog Driver

Member
17
27
13
Location
Forsyth Co, GA
Greetings Gents...
I have a daughter due a son on 03 Nov in Nashville, Sooo, I'll have to meet y'all at another event.

The thing is, I just cancelled my reservation for03-08 Nov on lot 57 on the Savannah River side at Bobby Brown Park...50 amps if you need it.

Hope it helps somebody.

My magic solar box is hung on a ship somewhere, so maybe December now...

Later
 

Streamline

Active member
Steel Soldiers Supporter
544
107
43
Location
Comer, Ga.
ISO... Anyone have a few Vintage Stretchers I can get for a good deal, they can bring to the rally for me.
They do not need to be in good shape as long as they still open and lock out.
The cloth can have some rips or holes, but the cloth still needs to be good enough to to use as a table.

I'm wanting to use them for tables, on my Stretcher stands I have.
Thanks
 

Attachments

Bill W

Well-known member
1,985
42
48
Location
Brooks,Ga
ISO... Anyone have a few Vintage Stretchers I can get for a good deal, they can bring to the rally for me.
They do not need to be in good shape as long as they still open and lock out.
The cloth can have some rips or holes, but the cloth still needs to be good enough to to use as a table.

I'm wanting to use them for tables, on my Stretcher stands I have.
Thanks
I have one, I'll bring it to the rally. $15.00 ??
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks