Official NC Denton Rally 2019 buy/sell

[wheelspinner]

Post up here your wants/needs/for sale items.

PLEASE ! If you commit to bring or buy something, maintain contact and follow through.



Here is the rally thread: https://www.steelsoldiers.com/showthread.php?184472-Official-NC-Denton-Rally-24-28-apr-2019

 

[SCM35A2]

Ok guys, I'm looking for the following for my M923A2 5ton truck...

1) Hard top
2) Driver's side/left inner wheel well splash guard assembly
3) A few heavy shackles

For my M35A2 truck I'm looking for...

1) Hard top with little to no rust & not beat up! The top on my truck is eat up with rust on the inner lips.
2) 3/4 tow bar pins
3) Wooden storage boxes-(military) *Post pics of what you have.
4) Jerry cans-(older style)

* I'm willing to pay a deposit down to anyone with the hard tops too!

 

[michigandon]

M880 Rear Bumper $175.

Various M880 drivetrain parts, axles, hubs, etc. Too numerous to list. PM me and I’ll see if I have what you want/need.

 

[wheelspinner]

Ok guys, I'm looking for the following for my M923A2 5ton truck...

1) Hard top
2) Driver's side/left inner wheel well splash guard assembly
3) A few heavy shackles
4) New style plastic fuel cans (two)

For my M35A2 truck I'm looking for...

1) Hard top with little to no rust & not beat up! The top on my truck is eat up with rust on the inner lips.
2) 3/4 tow bar pins
3) Wooden storage boxes-(military) *Post pics of what you have.
4) Jerry cans-(older style)

Donnie I have plastic fuel cans @$45 each (edit all gone!)

 

[SCM35A2]

Donnie I have plastic fuel cans @$45 each

Ok, put me down for 2 please sir. Thanks

 

[davidhdale]

Fuel can

I will take 2 fuel cans to also looking for a hard top or soft top for a m35

 

[SCM35A2]

Anyone have a use/need for some new/never opened Lube King Hydraulic Fluid AW ISO 32-(2 gallons each) 4 gallons total/2 bottles. $20 for both bottles.
I also have these heavy duty storage/stack able boxes-(used) that are 14.5x11x5.5 inches deep. They have a 60lb weight capacity, we used them to store bolts in where I work. I have 13 of them & I'll take $50 for them all. I'll also throw in these smaller boxes-(8 total) for an additional $10 to whoever buys the larger boxes.
BOXES SOLD!

 

[Dock Rocker]

I will have a few things I am bringing.

1. Hmmwv mike market hydraulic rear winch with bumper. It will include the long hydraulic hoses and controls solenoids. $900






1 Hmmwv gas tank with instal kit. $75




M998 A-1 with 242 transfer case and 10k axles. 6.2 with 3 speed. X-doors, jack rails, 4 man bulkhead, rhino tire carrier. New batteries this summer. Rear view and passenger side view cameras installed. Custom upper console. Custom roof rack made from H1 rack. The truck runs great. The GP system functions properly to at least 25 degrees (that’s as cold as it has gotten here).

Front 12.5k warn winch. Rear mile marker winch available for additional cost

12 volt fuse panel located above the upper console for 12v accessories. 12 volt chargers located in ammo can console as well.

Complete 4l80 swap (minus front prop shaft) available for an additional cost.

Tagged in Mississippi with a clear Mississippi title.

$18,000

 

[wheelspinner]

I will take 2 fuel cans to also looking for a hard top or soft top for a m35

Is tan ok? I only had 2 green.

 

[davidhdale]

Is tan ok? I only had 2 green.

yes sir it fine

 

[bikeman]

I also have these heavy duty storage/stack able boxes-(used) that are 14.5x11x5.5 inches deep. They have a 60lb weight capacity, we used them to store bolts in where I work. I have 13 of them & I'll take $50 for them all. I'll also throw in these smaller boxes-(8 total) for an additional $10 to whoever buys the larger boxes.

I'll take the above.

-----------------------------------

Looking for:

1x GMTK

M880 Seat kit, seat parts, basically the metal that "folds" (aka pivots) down to form the seat. No idea if it's the same as a CUCV.

 

[jkcondrey]

I have two m35a2 cab seat sets. The driver seat with passenger seat/fold down stand. Both are in fair to good condition. Will need new fabric/etc, but the steel is pretty good shape. I will bring them if offered on. No idea on price lets say $50 each. Ill add some other m35 items later on.

 

[SCM35A2]

I'll take the above.

-----------------------------------

Looking for:

1x GMTK

M880 Seat kit, seat parts, basically the metal that "folds" (aka pivots) down to form the seat. No idea if it's the same as a CUCV.

Consider them yours sir!

 

[Big Tom]

Looking for the weather cover for the nato slave plug on my m35a2. Would like to get a metal one but plastic would work.

Thanks
Big Tom

 

[4XDesign]

Ok guys, I'm looking for the following for my M923A2 5ton truck...

1) Hard top
2) Driver's side/left inner wheel well splash guard assembly
3) A few heavy shackles

For my M35A2 truck I'm looking for...

1) Hard top with little to no rust & not beat up! The top on my truck is eat up with rust on the inner lips.
2) 3/4 tow bar pins
3) Wooden storage boxes-(military) *Post pics of what you have.
4) Jerry cans-(older style)

* I'm willing to pay a deposit down to anyone with the hard tops too!

When did you get a 5Ton!?! Awesome

 

[SCM35A2]

When did you get a 5Ton!?! Awesome

Just a few weeks ago, buddy of mine had one down in GA so I had Wes go pick her up for me. Its a super nice truck, just wanting a hard top to make her look meaner lol.

 

[Oxyacetylene]

Want to buy:
- Ladder for M1079
- Antenna masts: crank up, launcher style, or manpack
- MEP-831A, maybe
- LMTV/FMTV Driver's side antenna mount

For Sale:
- OE-254 antenna setup, complete, great condition, $300. Thought I would use it and have never put it up.

 

[wgr4]

LMTV rim

I am looking for a rim for the spare tire on my LMTV.

 

[wheelspinner]

I am looking for a rim for the spare tire on my LMTV.

I’ll have some. $50 each

 

[wgr4]

Rim

I’ll have some. $50 each

I will take one.

Thanks,
W