Official NC Denton Rally 2021 Buy/Sell

[Mullaney]

Hi guys and gals!

It seems like the Denton Rally is still on schedule... I would like to create a Buy & Sell thread here to get the trading and swapping, buying and selling started this year. Now that I have that part done, I need to go find something to buy or sell!

Welcome to the fun!

Tim

 

[SCM35A2]

Subscribed!!

 

[microjeep]

Thanks, here's a link to the event, I will post link to this thread on event thread. https://www.steelsoldiers.com/threads/denton-nc-2021.200880/#post-2344970

 

[Mullaney]

Not whining or crying guys, but so far all I have been able to find to sell is one bent bumper from an MTV and a couple of LMTV leaf springs. Already found a replacement bumper last year. My pickings seem to be really slim on stuff to sell.

Has anybody started rummaging their stash?

 

[TacMac2012]

Some stuff I can bring:


MTVR A/C kit, new in crate $1500
(2) new MK48 fuel tanks with straps (75 gallon) $300/ea
(1) HMMWV Red Dot A/C kit new in box $2300
HMMWV ECV hood, grille, frame extensions, ECV fan shroud, ECV radiators
HMMWV hood (regular) with Special forces style Pioneer tool brackets $600
(2) 400 (or 450?) amp alternators new in crates
HMMWV A2 style tow points front and rear
Scepter fuel cans assuming I still have any by that point, $65/each (new, green)
HMMWV CV shafts (new, not chinese) $$???
Front spring kit from M939 series for bobbing M939's, all brackets, etc $400
Lift kit for CUCV (I think 4-6"). Front springs, rear blocks. $200

MANY LMTV parts, if you need anything just ask, I will have a trailer load of stuff. Shocks, brake chambers, bumpers, battery covers, ETC ETC ETC. Some stuff like shocks would be CHEAP just to get them gone!

 

[Coffey1]

I would like 2 fuel cans

 

[Mullaney]

Some stuff I can bring:

(2) new MK48 fuel tanks with straps (75 gallon) $300/ea
(1) 50 gallon round red fuel tank, $200
(1) HMMWV Red Dot A/C kit new in box $2300
HMMWV ECV hood, grille, frame extensions, ECV fan shroud, ECV radiators
HMMWV hood (regular) with Special forces style Pioneer tool brackets $600
(2) 400 (or 450?) amp alternators new in crates
HMMWV A2 style tow points front and rear
Scepter fuel cans assuming I still have any by that point, $65/each (new, green)
S-141 shelter with a RV style A/C unit (with heat) on the roof $2,000 (will likely sleep in it if I bring it)
M1082 trailer with cargo cover (camo trailer/cover, nice shape) NO TITLE $1600
HMMWV CV shafts (new, not chinese) $$???
Front spring kit from M939 series for bobbing M939's, all brackets, etc $400
Lift kit for CUCV (I think 4-6"). Front springs, rear blocks. $200

MANY LMTV parts, if you need anything just ask, I will have a trailer load of stuff. Shocks, brake chambers, bumpers, battery covers, ETC ETC ETC. Some stuff like shocks would be CHEAP just to get them gone!

I am in for the S-141 shelter. Just measured and it will fit nice and low on the deck of my M989a1.
Towing it behind my M1089, I won't be struggling to stop it or get "passed" by it either!
.

 

[TacMac2012]

I am in for the S-141 shelter. Just measured and it will fit nice and low on the deck of my M989a1.
Towing it behind my M1089, I won't be struggling to stop it or get "passed" by it either!
.

You won't get passed by it, but you won't pass a fuel station without stopping, and you will get passed by everyone on the highway

 

[bikeman]

I'll bring my old UCP ACUs, usually on the larger side. I honestly don't know what else at this time.

 

[Ferroequinologist]

Set of m39/m809 brake shoes, all 12 needed, NOS and some religned $500
Takeout m809 radiator in very good shape $400 *SOLD*
Front m809 flat bar grill guard, in excellent shape $75
Tow bar, 1in feet, set of axle clamps $500
Convoy lights, the rotating kind, just the lights and bulbs NOS $75 each, have 4. SOLD 2, have 2 left.
Metal jerry cans, some poor to good shape. $20-$50 depending on condition
Plastic wrecker spotlights with good bulb- $75 each have 3.
One set of LED front marker/turn lights, fair shape plastic has some cracks but they work fine $100 for the pair
Several sets of composite tail lights $60 a pair
Single chain tow bar axle clamp set $150, used for smaller vehicles.
Good take off m809/m939 nhc 250 engine power steering pumps. $50 each have 4. SOLD 1, have 3 remaining
Huge pile of different model 60amp alternators. All need rebuilding, some just bearings, some regulators. $50 each.
One good take off Hmmvee alternator, 60amp $300. Can be used on any M series, just change the pulley.
One good 24v/12v dual alternator, in the box. $500

Lots of spare LDT-465 parts, just ask.

I probably will only bring the big stuff if spoken for.

 

[Oxyacetylene]

Have for Sale:

• OE-254 antenna, complete kit with bag and everything, good condition. $250

Want to Buy:

• M1079 boarding ladder. Yep still looking for one. The specific ladder that fits the M1079 van enclosure.
• Maybe a heavy trailer, something good to haul a 7-8k lb tractor.
• M1078 tarp frame rails. The straight horizontal pieces. Some of mine are getting pretty rusty where the straps go around them. Probably should just get some aluminum ones cut, but if you have some spares...

 

[Ferroequinologist]

Located some more jun... er... high quality parts.

M39/m809 under cab toolbox with brackets, step, and jerry can holder. $100

M39/m809 brackets, air tanks, and air pack, good take off, worked good. $250

Deuce m35 battery box brackets and side pieces, no door or step. $75

Takeoff m39/m809 transfer case, off a wrecker. Has PTO on rear. Pretty crusty exterior, some of the bolt heads/nuts are rusted away. Case worked great and didn't leak. $250 will only load if spoken for.

60ft cable, trailer plug on one end, cannon plug on the other. NOS. I think it fits some tow light for an armor piece. End could be changed to work with standard towbar light set, or build a custom tow light set. $200



Heavy metal truck box, some surface rust inside. No key for lock but they are easy to change. Door opens and latches fine, has chains to keep it open. $200



Pics of some of the other stuff I had listed

 

[bikeman]

I've just gotten in some NICE condition Large size older gear. Some Cold Weather gear too.

 

[Floridianson]

Let me look through the goodie bag and see what is left. Plans are to come up right now.

 

[Ferroequinologist]

Let me look through the goodie bag and see what is left. Plans are to come up right now.

If you do make it up, can you bring me one of those m939 mufflers if you still have them?

Hope you can make it and not just cause I need a muffler!

 

[Ferroequinologist]

Even more to sell-
Multifuel D turbos, 2 available, excellent condition- $300 each
M915/M915a1 tierod with ends, NOS $100
Right hand lugnuts for trailers or front wheels -$2 each
Driverside door for m44/m809/m939 complete, good glass, good mirror, regulator works and latch and handles work, with hinges one small rust hole in the bottom edge. $150

Only going to bring the big stuff if spoken for!

What I am wanting-
Gauges, preferably pre-carc painted (od), nos or outstanding shape, Douglas connectors
Armor headlight mounting brackets. REALLY want a set of m114 headlight brackets...
M151 heater
A really nice left tank, right tank fuel dash tag for the selector switch for the gauges
A military 251 engine for the m37, or parts specific to that length block (waterproof distributor, oil pump) so I can convert a long block flathead to a mil engine
A Chrysler flatheat either 251 or 265
Anyone parting out or know someone parting a tracked skid steer? I need tracks, the drive sprockets, and idlers. Not picky on brand or model, let me know.

 

[Floridianson]

Last one of 939 series muffler spoken for. Nos 809 series PCB $50.00. NOS 809 series new china master cylinder $50.00. 5 ton and Deuce snatch blocks $100.00 a piece for 5 ton. $75.00 Deuce. Last one NOS spring seat base top. $80.00. Still have some NOS Deuce or 5 ton battery boxes $80.00. Still looking through stash. I might be in the 915 and trailer or my white 3500 GMC no trailer who knows!

 

[Mullaney]

Last one of 939 series muffler spoken for. Nos 809 series PCB $50.00. NOS 809 series new china master cylinder $50.00. 5 ton and Deuce snatch blocks $100.00 a piece for 5 ton. $75.00 Deuce. Last one NOS spring seat base top. $80.00. Still have some NOS Deuce or 5 ton battery boxes $80.00. Still looking through stash. I might be in the 915 and trailer or my white 3500 GMC no trailer who knows!

.
I would like to speak up for several 5-Ton Snatch Blocks. No such thing as too many of those things if it all goes bad. Definitely would like to have that large green one for sure and at least three others. Just PM me if you want PayPal money now or I can bring folding bread at the Rally.

THANKS,

Tim

 

[SandBar]

Anyone have hemmt or combat rims or a m51 dump cover by chance ?

 

[Recovry4x4]

Let me look through the goodie bag and see what is left. Plans are to come up right now.

Let me practice my comedy skit.

"James, you should really wait until April. That's when everyone else will be there" LOL


Seriously, all you folks with M39 series trucks and deuces should jump on those plastic battery boxes James has. They are super nice and quite the deal.