Oil Filter Conversion Problem

[HummerinTX]

I am changing my oil, I started by removing the OEM oil filter housing and went to put on my new Oil Filter adapter and it doesn't look like it is going to work. I'll post some pics. Any ideas?

 

[simp5782]

What adapter number did you get?. Some are thicker than others

 

[HummerinTX]

That bolted adapter comes off. And the adapter you have goes in its place

What adapter number did you get?

It says FL753 on the box. So which bolts do I remove from the plate thats on the truck? All of them on the inside? It looks like some of them go all the way through to the block.

 

[HummerinTX]

Yeah it looks like my adapter plate is too thin. It should be thicker like the one in the picture you sent. Thanks for the help. Now off to buy a stock canister filter...

 

[M35A2-AZ]

The ones I used were thicker then that. I think that one is for the older Cummins. I will go check for the p/n number you need.

 

[simp5782]

Yea that one you have is for gen set and older units it has a different oil pump setup why i mentioned the adapte4

Order Baldwin ob1368

 

[M35A2-AZ]

Ok, Found some # Baldwin OB-1368 or Hasting KF-26

 

[HummerinTX]

Ok, Found some # Baldwin OB-1368 or Hasting KF-26

Awesome man! I really appreciate that!

 

[HummerinTX]

Yea that one you have is for gen set and older units it has a different oil pump setup why i mentioned the adapte4

Order Baldwin ob1368

What website is that from? I've Google it and can't find that for sale? Thanks

 

[simp5782]

What website is that from? I've Google it and can't find that for sale? Thanks

Products - GFC Performance

Your Source for Wholesale Donaldson, Baldwin, Fleetguard, Mann+Hummel, Racor, Parker -Process, Finite, Hydraulics- GFC, PecoFacet and more

usa.petroil.net

 

[Tow4]

Products - GFC Performance

Your Source for Wholesale Donaldson, Baldwin, Fleetguard, Mann+Hummel, Racor, Parker -Process, Finite, Hydraulics- GFC, PecoFacet and more

usa.petroil.net

I also used the Baldwin part simp listed. I didn't see it commented on but there are two small gaskets in the kit. One is thinner than the other. After trial fitting it with the thin gasket, I decided to use the thicker one when I installed mine. I have seen people suggest using the thin one but it didn't look right to me.

 

[Rangerinv]

what is the part number for the older model

 

[M35A2-AZ]

I have one of the older models if you want one.

 

[Rangerinv]

Absolutely, how much

 

[Rangerinv]

for the M818 correct

 

[M35A2-AZ]

PM sent.

 

[Iwo Jima]

I also used the Baldwin part simp listed. I didn't see it commented on but there are two small gaskets in the kit. One is thinner than the other. After trial fitting it with the thin gasket, I decided to use the thicker one when I installed mine. I have seen people suggest using the thin one but it didn't look right to me.

Hi so which one is the correct gasket to use on the NHC250? thicker or thinner? Thanks

 

[Iwo Jima]

What website is that from? I've Google it and can't find that for sale? Thanks

which of the smaller gaskets do you use on the NHC250? the thicker one or the thinner one? thanks

 

[Floridianson]

Hi so which one is the correct gasket to use on the NHC250? thicker or thinner? Thanks

I went with the thin one. If in question you could call Baldwin.

 

[Iwo Jima]

I went with the thin one. If in question you could call Baldwin.

I called baldwin, tech guy randy said use the thinner one on horizontal mount NHC motors. Thanks