• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Oil filters weaping

Speedwoble

Well-known member
606
296
63
Location
New Holland, PA
hello sir, i'm new to this. for some reason my cans kinda leak. any common reasons why? might these cans help?
Might check elsewhere in the forum for answers to your questions. There is a seal under the bolt, and a seal between the can and the block. the fiber seal between the can and the block should be replaced at oil changes.
 

mjcdetroit

Member
57
0
6
Location
Detroit
Deuces leak. My cans still weep a little bit. Even after I have swapped out the gaskets and properly torqued down the bolts. I do use Rotella 10w30 motor oil in her. In my case, the thinner 10w oil may seep out a little more than a 15w or straight 30. Now that I have a circulating tank block heater on her, the next oil change will be to a 15w40 with spin on filters.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks