• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Oil pump removel

Bill W

Well-known member
1,985
44
48
Location
Brooks,Ga
Sure
Follow the instuctions on page 39 in the TM 9-1840A rebuild manual [thumbzup].
Taking it off is easy alignment of dist and timing is a bit involved when you go and reinstall it
 

poppop

Well-known member
2,316
39
48
Location
Brooklet, Ga
Search for ghostriders M37 build thread. Lots of good info there including oil pump info. She had a failure because the rebuilders installed a civilian pump and that will not work.
 

Pintaro

New member
6
0
0
Location
Mcloud, Oklahoma
Im wanting to install a civilian oil pump and distributor to get rid of the 24v system.what are the benefits and or nonbenefits? In other words is this a good idea?
 

poppop

Well-known member
2,316
39
48
Location
Brooklet, Ga
I am not qualafied to answer those questions. I would think if you change out both it would not be a problem, but you can,t just change one.

As I stated above there is discussion on this in ghostriders thread. It may answer your questions. In any case its good reading with lots of info.
 
Top