Old new guy from texas

[Blackbear]

Welcome From Houston!

 

[frank8003]

Old new guy is a youngster......
Help him out guys, He did his part.

 

[ageregunner]

Welcome back from PA.

 

[prholley]

Welcome back and thank you for your service. I'm a noobie around here, just picked up a 5-ton, and having a blast. I live in Euless, so we're not to far away. I drive past your work all the time.

 

[grayparatrooper]

howdy. i'm in carrollton

 

[TC Fleet]

Hey HETvet,
Wondering if you could point me in the right direction on an issue I'm having with a M1070. I was relocating the shut off switch for the batteries and grounded out the 24v side. Now I get a crank but no start. Checked the circuit breakers and relays under the dog box but I have no wiring diagram or trouble shooting info to go by. Any help would be much appreciated.
Thanks
Mark

 

[HETvet]

I used to work in Carrollton. Hope you didn't get to beat up with the weather we got last night

 

[HETvet]

Hey HETvet,
Wondering if you could point me in the right direction on an issue I'm having with a M1070. I was relocating the shut off switch for the batteries and grounded out the 24v side. Now I get a crank but no start. Checked the circuit breakers and relays under the dog box but I have no wiring diagram or trouble shooting info to go by. Any help would be much appreciated.
Thanks
Mark

was it firing before the relocation? Is it cranking slower than normal?

 

[TC Fleet]

It was running great.Now it's spinning over good, not dragging, just no start

 

[HETvet]

It was running great.Now it's spinning over good, not dragging, just no start

Seems like a fuel issue to me.

 

[TC Fleet]

It there a fuel shut off solenoid that I could check? Just seems odd it won't fire off after the electrical short happened.

 

[Castle Bravo]

Make sure the breakers are all actually good. My "DDEC" breaker got physically damaged and the truck would crank but not start. It seemed to function correctly from the look and feel of it, but it was damaged internally, I guess. Replacing it fixed the issue.

 

[HETvet]

Make sure the breakers are all actually good. My "DDEC" breaker got physically damaged and the truck would crank but not start. It seemed to function correctly from the look and feel of it, but it was damaged internally, I guess. Replacing it fixed the issue.

This is what I was thinking

 

[TC Fleet]

Circuit breakers seem to be working. Getting power in and power out on all three ddec breakers. Getting power in two pins at ddec connection. Swapped breakers just to make sure. Still no start.

 

[HETvet]

Circuit breakers seem to be working. Getting power in and power out on all three ddec breakers. Getting power in two pins at ddec connection. Swapped breakers just to make sure. Still no start.

Man, you got me bud

 

[TC Fleet]

Lol, not exactly what I wanted to hear. Do you know where I could get a wiring diagram and trouble shooting guide from.

 

[HETvet]

Lol, not exactly what I wanted to hear. Do you know where I could get a wiring diagram and trouble shooting guide from.

Look at the publications on here. That's the best I can come up with brother

 

[TC Fleet]

Muchly appreciated