• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Old style horn button rubber cover wont stay attached!

steelandcanvas

Well-known member
6,187
85
48
Location
Southwestern Idaho
Sounds like it may not be seating correctly. Try a little spray silicone on the rubber cover, twist and push as you re-install. Everyone that works on these vehicles should have a can of spray silicone, even if only used to re-couple Packard connectors.
 

dmetalmiki

Well-known member
5,523
2,026
113
Location
London England
"Everyone that works on these vehicles should have a can of spray silicone, even if only used to re-couple Packard connectors".
Roger that, those horn covers are a pain if not fitted in all the way, with silicone or similar.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks