EastRidge
New member
- 8
- 7
- 3
- Location
- Plymouth Wisconsin
My dear 6 cylinder started to really mark it's spot on my garage floor.
The pan bolts in one area were at best finger tight, so I addressed that.....
The bottom of the flywheel drain/observation plug is missing and that's all "dry".
The drip issue comes off the back of the pan adjacent.....
I was going to initially just change the pan gasket, but me thinks I would miss a real opportunity to change out the rear main seal even if it's not the culprit.
I watched what I thought was an excellent YouTube video, and the rear main seal update LOOKS TO BE very achievable......
Any tips on this? I am thinking some Ultra Black at the mating surface of the seal halves?
Thanks and hope all had an great Thanksgiving.
The pan bolts in one area were at best finger tight, so I addressed that.....
The bottom of the flywheel drain/observation plug is missing and that's all "dry".
The drip issue comes off the back of the pan adjacent.....
I was going to initially just change the pan gasket, but me thinks I would miss a real opportunity to change out the rear main seal even if it's not the culprit.
I watched what I thought was an excellent YouTube video, and the rear main seal update LOOKS TO BE very achievable......
Any tips on this? I am thinking some Ultra Black at the mating surface of the seal halves?
Thanks and hope all had an great Thanksgiving.