• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Part # for transfer case rear seal? M1009

jdeoliveira74

New member
744
3
0
Location
wilmington nc
Ok looked thru tm's and I cannot find the part # for the rear seal in the transfer case. Mine is leaking pretty bad and I need to replace it !
thanks
Jon
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,185
113
Location
NY
1984 Blazer, thats all you need to tell them.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,185
113
Location
NY
You need to look at TM9-2320-289-34P
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,185
113
Location
NY
I think this is what you need, but I would look at the pic in the TM to be sure.

29940-0445 Seal
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
240
63
Location
OKC, OK
I think this is what you need, but I would look at the pic in the TM to be sure.

29940-0445 Seal
I think he is talking about seal #2 from the diagrams. For the rear extension

# 9449-K NSN 5330-01-096-6775

According to www.wbparts.com it crosses with the following depending on the manufacturer

13942
18992
523848
8625893
8655031
9449-K
9449SKR


NAPA shows the seal as:

NOS 18992 - Transfercase Rear Output Seal

Oreilly's has one - Part #9449

You may also need a speedi-sleeve if the driveshaft is worn too much.
 
Last edited:
Top