Part number for the small square vacuum connector on tranny vacuum regulator?

[minimalist]

I looked through the cucv parts manual with no listing for the square black vacuum connector that connects to the transmission vacuum regulator. The two vacuum hoses then connect into that square block. Is there a part number for this or go ahead and connect the vacuum lines directly to the TVR?

 

[K9Vic]

It is not needed, just connect the hoses to the regulator.

 

[Keith_J]

Top port on valve goes to transmission. The only reason for the block was to keep he order, as long as you remember the mnemonic of "top to transmission", the block isn't needed.

 

[scottladdy]

It is not needed, just connect the hoses to the regulator.

This, and remember "T" for Top to Transmission

 

[Warthog]

That rubber block is no longer available. Used is the only option.
And yes just remember "top to transmission"

 

[minimalist]

Seeing how I pulled them off and forgot their order the long or short line?

 

[cucvrus]

Short line goes to transmission. It is the short one that connects to the steel vacuum tube that runs down to the transmission. The other end comes from the vacuum pump located at the rear of the engine.

 

[cucvrus]

They used that vacuum block on several GM models on vacuum lines. If you really need one go to a upullit and look around.

 

[the skull]

I just want to say a big Thank You to everyone who posted in this
thread. I just went out and fixed mine!

 

[minimalist]

Thanks for all the help. Shifts much better now. Best $4.00 I've spent in a good while.

 

[Warthog]

Reference for others

The green line is on top and connects to the metal line going to the transmission. The blue line goes to the vacuum pump.



And the vacuum line size is list in this thread

http://www.steelsoldiers.com/showthread.php?117261-Vacuum-hose-part-number-anyone-have-it