• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Part numbers for dana 60 hub

Gripy

Member
398
3
18
Location
Los Angeles, CA
So looking through 34-p fig 96 I can't find the part numbers for the bearings in the hubs. Also what's the torque spec for the spindle nut?



Sent from my SAMSUNG-SGH-I747 using Tapatalk
 

Chaski

Active member
684
56
28
Location
Burney/CA
Based on the comntamination in those pictures you might want to break your front end down a little further and remove the spindles. The roller bearing in the spindle for the stubshaft might be toast too.
 

Gripy

Member
398
3
18
Location
Los Angeles, CA
I found the part numbers for all 3 of the bearings for the hub and spindle.
TIMKEN SET38 front outer bearing and race.
TIMKEN 382A inner race
TIMKEN 387AS inner bearing
TIMKEN SBK3 spindle bearing and seals.

Do you guys think that I need to replace the locking hubs too?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks